Cloud CX263, Three Zone Mixer

Cloud CX263, Three Zone Mixer Features

- 1 stereo zone and 2 mono zones
- Easy to use
- Easy to install and configure
- 6 stereo line inputs
- Line 6 priority over other input sources in all zones
- Remote music mute
- Paging microphone access for Mic 1 only
- Microphone over music priority
- Two band microphone EQ behind front panel facia
- 100Hz high pass filter on all microphone inputs
- Two band music EQ per zone on the rear panel
- Front panel gives Mic 1 level, Mic 2 level, music level and music source selection controls
- Optional equaliser modules for Bose loudspeakers can be fitted to any output
- Optional CDI-S200 Serial Interface Card (RS232)

Cloud CX263, Three Zone Mixer Specifications

Line Inputs
- Frequency Response: 20 Hz - 20 kHz, +0, -0.3 dB
- Distortion: <0.05% typical, 20 Hz to 20 kHz
- Sensitivity: 100 mV (-17.8 dBu) to 1.5 V (+6 dBu)
- Input Gain Control: 24 dB
- Input Impedance: 48 kohms
- Headroom: >20 dB
- Noise: <-84 dB. 20 Hz to 22 kHz @ 0 dB gain
- Equalisation:
  - LF: ±10 dB @ 50 Hz
  - HF: ±10 dB @ 10kHz

Microphone Input
- Frequency Response: -3 dB @ 100 Hz (filter) to 20 kHz, ±0.5 dB
- Distortion: <0.05%, 20 Hz to 22 kHz
- Gain Range: 10 dB to 50 dB
- Input Impedance: >2 kohms
- Common Mode Rejection: >70 dB @ 1 kHz
- Headroom: >20 dB
- Noise: -128 dB EIN, 20 Hz to 22 kHz @ 0 dB gain
- Equalisation:
  - LF: ±10 dB @ 150 Hz
  - HF: ±10 dB @ 5 kHz

Outputs
- Output level (nominal): 0 dBu
- Maximum output level: +20 dBu
- Minimum load impedance: 1.2 kohms

Physical & Dimensions
- Dimensions (w x h x d): 482.6 mm x 44 mm (1U) x 152.5 mm
- Shipping Dimensions (w x h x d): 560 mm x 60 mm x 290 mm
- Weight: 2.15 kg
- Shipping Weight: 3.15 kg
- Power input: 85 V to 253 V AC, 50/60 Hz
- Current consumption: 43.1 mA at 240 V
- Fuse Rating: 1A
- Fuse Type: T1A, 20 x 5 mm

Further Product Information Below

Cloud CX263EK Manual (PDF)

Cloud CX263EK Data Sheet (PDF)