Cloud CX263, Three Zone Mixer

The Cloud CX263 is the ideal solution for leisure, licensed and retail venues. This compact unit has 6 line level inputs and 2 mic inputs with paging microphone access on Mic 1. The CX263 has one stereo and two mono zones. The line inputs and mics can be independently routed to any output zone via the front panel controls, alternatively the music signals on each zone can be controlled remotely by the RL-1 (level only) or RSL-6 (source and level).

Cloud CX263, Three Zone Mixer Features

- 1 stereo zone and 2 mono zones
- Easy to use
- Easy to install and configure
- 6 stereo line inputs
- Line 6 priority over other input sources in all zones
- Remote music mute
- Paging microphone access for Mic 1 only
- Microphone over music priority
- Two band microphone EQ behind front panel facia
- 100Hz high pass filter on all microphone inputs
- Two band music EQ per zone on the rear panel
- Front panel gives Mic 1 level, Mic 2 level, music level and music source selection controls
- Optional equaliser modules for Bose loudspeakers can be fitted to any output
- Optional CDI-S200 Serial Interface Card (RS232)

Cloud CX263, Three Zone Mixer Specifications

Line Inputs
- Frequency Response: 20 Hz - 20 kHz, +0, -0.3 dB
- Distortion: <0.05% typical, 20 Hz to 20 kHz
- Sensitivity: 100 mV (-17.8 dBu) to 1.5 V (+6 dBu)
- Input Gain Control: 24 dB
- Input Impedance: 48 kohms
- Headroom: >20 dB
- Noise: <-84 dB. 20 Hz to 22 kHz @ 0 dB gain
- Equalisation:
  - LF: ±10 dB @ 50 Hz
  - HF: ±10 dB @ 10kHz

Microphone Input
- Frequency Response: -3 dB @ 100 Hz (filter) to 20 kHz, ±0.5 dB
- Distortion: <0.05%, 20 Hz to 22 kHz
- Gain Range: 10 dB to 50 dB
- Input Impedance: >2 kohms
- Common Mode Rejection: >70 dB @ 1 kHz
- Headroom: >20 dB
- Noise: -128 dB EIN, 20 Hz to 22 kHz @ 0 dB gain
- Equalisation:
  - LF: ±10 dB @ 150 Hz
  - HF: ±10 dB @ 5 kHz

Outputs
- Output level (nominal): 0 dBu
- Maximum output level: +20 dBu
- Minimum load impedance: 1.2 kohms

Physical & Dimensions
- Dimensions (w x h x d): 482.6 mm x 44 mm (1U) x 152.5 mm
- Shipping Dimensions (w x h x d): 560 mm x 60 mm x 290 mm
- Weight: 2.15 kg
- Shipping Weight: 3.15 kg
- Power input: 85 V to 253 V AC, 50/60 Hz
- Current consumption: 43.1 mA at 240 V
- Fuse Rating: 1A
- Fuse Type: T1A, 20 x 5 mm