JTS SIEM-111 In Ear Monitoring Complete System, SIEM-111T, SIEM-111R & IE1 (Channel 38)

JTS SIEM-111 In Ear Monitoring Complete System, SIEM-111T, SIEM-111R & IE1 (Channel 38) Features
JTS SIEM-111T & JTS SIEM-111R Transmitter Features

- There are 961 selectable UHF channels available. As many as 16 sets of SIEM-111T transmitters can operate on the same stage
- The system offers 4 groups, with each group having 16 compatible preset channels to choose from. This allows the monitor engineer to set up systems quickly and easily
- MPX Stereo Audio Transmission / Reception, switchable to Mono operation if desired
- All metal case construction on the SIEM 111R and SIEM 111T
- The JTS advanced circuitry assures outstanding signal-to-noise ratio
- IE-1 and IE-6 earphones seal off the ear canal with JTS designed Dyna-Driver ear buds which reduce undesired stage noise, ambient sound levels
- 3 pairs of different sized Silicon sleeves included with the IE series earphones ensure a right fit for the users ear canal and comfort

JTS IE-1 Earphones Features

- Single Armature Driver
- Tailored Acoustic Design
- Excellent isolation from background noise
- Ideal for in ear monitoring

JTS SIEM-111 In Ear Monitoring Complete System, SIEM-111T, SIEM-111R & IE1 (Channel 38) Specifications

- Carrier Frequency Range: 38, 606.5 - 630 MHz (License Required)

JTS SIEM-2T Transmitter Specifications

- RF Outputs: 10mW
- Frequency Deviation: ±40KHz
- Carrier Frequency Range: Channel 38, 606.5 - 630 MHz (License Required)
- LCD Display: AF Level, Stereo/Mono, Attenuation Level, Group, Channel, Frequency
- Audio Input Impedance: 20 kΩ
- Norminal Input Level: -10dBV; 0dBV (ATT -10dBV)
- Maximum Input Level: 10dBV; 20dBV (ATT -10dBV)
- Audio Input Connector: 2x Balanced XLR / 6.3mm Jack Combo Socket
- Audio Output Connector: 1x 3.5mm (1/8 inch) Stereo Jack, 1x 6.3mm (1/4 inch) Stereo Jack
- Loop Out Connector: 2x Balanced Loop out socket
- Switching Power Supply: 100-240V Switch mode power supply

JTS SIEM-2R Receiver Specifications

- Output Connector: 3.5mm (1/8 inch)
- Carrier Frequency Range: Channel 38, 606.5 - 630 MHz (License Required)
- LCD Display: RF Level, Lock-On, Battery Fuel Gauge, Stereo/Mono, HF booster, Dynamic Limiter, Group, Channel, Mute, Frequency
- Power Supply: 2x AA
- Earphone output: 60mW
- Input Level Select Switch: 0dB / -10dB
- Minimum Load Impedance: 16 Ω
- Typical Battery Life: 12+ Hours

JTS IE-1 Earphones Specifications

- Frequency Response: 20~20,000 Hz
- Transducer Type: Dynamic
- Impedance: 16 Ω
- Sensitivity (at 1000Hz): 114 dB/mW
- Distortion: Less than 0.3%
- Cord Length: 148cm with 3.5Ø stereo plug
- Net Weight: 6 grams (cable excluded)

Further Product Information Below

JTS SIEM-111 Manual (PDF)