Le Maitre 2874 Curly Tube Heater For Le Maitre Neutron XS Hazer
The Le Maitre 2874 Curly Tube Heater For Le Maitre Neutron XS Hazer is a replacement curly tube heater that fits the Le Maitre Neutron XS Hazer. Should tube replacement be required, then all the necessary safety precautions should be made before doing so:
- The machine is not connected to the mains supply
- The machine is placed on a suitable work surface
- The machine has been allowed to cool for at least 10 minutes
- The use of correct tools for panel removal and tube replacement
- The ability to be able to confirm suitability of use after the replacement has been made
- This tube is sited underneath the fan inlet side panel
- Removing this side panel will allow easy access and replacement should it ever be required
- Two M8 nuts secure the ends of the tube and a quick connector completes the temperature sensor connection
- The nuts secure the tube both physically and electrically
- It is important that they should not be over tightened whilst at the same time, tight enough to provide a good electrical connection
- Push on silicon tubing supplying the fluid and air drive is easily removed from the input end
- It is best to use 'nyties' since this will add security to the fluid and air supply connections
- After tube replacement, and having checked that all parts are as they should be, the tube should be run through a 'bedding in' period, where any tendency to occasionally output very fine fluid particles (if any), will clear
Click Here for Printer Friendly Version
01271862221
