DBX ZC-BOB Break Out Box for ZC ZonePro Wall Controllers

DBX ZC-BOB Break Out Box for ZC ZonePro Wall Controllers Features

- Allows home run or parallel wiring to the DriveRack and ZonePro devices
- Extended utility to the DriveRack and ZonePRO families
- Analog DC voltage
- ZC Series: Logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting
- Wired with CAT 5 Cable
- RJ-45 connectors at distances up to 1000ft

DBX ZC-BOB Break Out Box for ZC ZonePro Wall Controllers Specifications

- Connectors: 6x RJ-45
- Series Wiring: Maximum Cable Length varies with number of Zone Controllers. For Example, Three Zone Controllers: 600 ft. Six Zone Controllers: 300 ft.
- Parallel Wiring using ZC-BOB: Up to Six Zone Controllers: 1000 ft.
- Parallel Wiring Cable: CAT5 or CAT5E with 28.6 Ohm/M (Ohm/1000ft.) nominal DCR and rated VW-1 or higher.

Certification / Qualification:
- UL 60065
- IEC 60065
- EN 55013
- E60065

Further Product Information Below

DBX ZC Series Manual (PDF)

DBX ZC-BOB Data Sheet (PDF)