JBL JRX225 Dual 15-Inch 2-Way Passive Carpeted Speaker, 500W @ 4 Ohms

JBL JRX225 Dual 15-Inch 2-Way Passive Carpeted Speaker Features

- Dual JBL low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more crosssectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling
- JBL 2414H-C 25 mm (1-inch) polymer diaphragm compression driver improves high frequency performance as well as system reliability
- The advanced network topology crossover design shapes frequency response and delivers coherent summation in the crossover region
- A "Quasi 3-Way" design offers the extra bass for which a dual fifteen system is designed, but without sacrificing performance in the critical mid-range. The upper woofer produces mid-frequencies and bass, while the lower woofer concentrates on bass only. The reduction in mid-range phase cancellation greatly improves midrange sound quality and coverage
- High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating
- Progressive Transition high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response
- The rugged, acoustically superior enclosure is constructed from 19 mm (0.75-inch) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance
- SonicGuard protects the highfrequency driver from excess power without interrupting the performance
- Non-resonant, all-steel handles are used
- Attractive 18-gauge perforated, steel grille protects components from damage

JBL JRX225 Dual 15-Inch 2-Way Passive Carpeted Speaker Specifications

- Power Rating: 500 W / 2000 W
- Frequency Range (-10dB): 42 Hz - 18 kHz
- Frequency Response (±3 dB): 62 Hz - 13 kHz
- Sensitivity (@1m): 100 dB SPL (1w/1m)
- Nominal Impedance: 4 ohms
- Recommended Amplifier Power: 500 W to 1000 W into 4 ohms
- Maximum SPL (1m): 133 dB
- Nominal Dispersion: 90° x 50°
- Crossover Frequency: 2.2 kHz
- Drivers:
  - HF: JBL 2414H-C , 1-inch exit compression driver mounted on Progressive Transition Waveguide
  - LF: JBL M115-8A xs2
- Inputs: Neutrik Speakon NL-4 (x1); .25 in TS phone jack (x1); parallel
- Enclosure: MDF (Medium Density Fiberboard) covered in black carpet

Physical & Dimensions:
- Height: 1092mm
- Width: 464mm
- Depth: 426mm
- Weight: 42.6kg

Further Product Information Below

JBL JRX225 Data Sheet (PDF)