Cloud CX163, Two Zone Mixer

Cloud CX163, Two Zone Mixer Features

- 2 zone stereo mixer with mono utility output
- Both stereo zones can be configured to run as mono
- Utility output is constant OdB
- Utility music source is selectable via internal jumper
- 6 stereo line inputs
- Line 6 priority over other input sources in zone 1 only
- Remote music mute
- Microphone access contacts for paging to all 3 zones
- 100Hz high pass filter on all microphone inputs
- Two band microphone EQ
- Remote level control in each zone using RL1
- Front panel controls give microphone level, music source and volume
- EQ card option

Cloud CX163, Two Zone Mixer Specifications

Line Inputs
- Frequency Response: 20 Hz to 22 kHz, +0/-0.5 dB
- Distortion: <0.05% typical, 20 Hz to 20 kHz
- Sensitivity: 100 mV (-17.8 dBu) to 1.5 V (+6 dBu)
- Input Gain Control Range: 24 dB
- Input Impedance: 48 kohms
- Headroom: >20 dB Noise <-84 dB, 20 Hz to 22 kHz @ 0 dB gain
- Equalisation:
  - LF: ±10 dB @ 50 Hz
  - HF: ±10 dB @ 10kHz

Microphone Input
- Frequency Response: -3 dB @ 100 Hz (filter) to 20 kHz, ±0.5 dB
- Distortion: <0.05%, 20 Hz to 22 kHz
- Gain Range: 10 dB to 50 dB
- Input Impedance: >2 kohms
- Common Mode Rejection: >70 dB @ 1 kHz Headroom >20 dB
- Noise -128 dB EIN, 20 Hz to 22 kHz @ 0 dB gain
- Equalisation:
  - LF: ±10 dB @ 100 Hz
  - HF: ±10 dB @ 5 kHz

Outputs
- Output level (nominal) 0 dBu
- Maximum output level: +20 dBu
- Minimum load impedance: 1.2 kohms
- General Power input: 85 V to 253 V AC, 50/60 Hz
- Current consumption: 42.9 mA at 240 V
- Fuse Rating: 1A
- Fuse Type: T1A, 20 x 5 mm

Physical & Dimensions
- Dimensions (w x h x d): 482.6 mm x 44 mm (1U) x 152.5 mm
- Shipping Dimensions (w x h x d): 560 mm x 140 mm x 290 mm
- Weight: 2.10 kg
- Shipping Weight: 3.2 kg

Further Product Information Below

Cloud CX163EK Manual (PDF)

Cloud CX163EK Data Sheet (PDF)