DBX 266XS Dual Compressor/Gate

DBX 266XS Dual Compressor/Gate Specifications

Input:
- Connectors:
  - ¼-inch / 6.35mm Jack
  - Female XLR (pin 2 hot)
- Type: Electronically balanced/unbalanced, RF filtered
- Impedance:
  - Balanced: 40 kΩ
  - Unbalanced: 20 kΩ
- Max Input Level: >+22 dBu balanced or unbalanced

Outputs:
- Connectors:
  - ¼-inch / 6.35mm Jack
  - Male XLR (pin 2 hot)
- Type: Impedance-balanaced/unbalanced, RF filtered
- Impedance @ +4 dBu:
  - Balanced: 100 Ω
  - Unbalanced: 50 Ω
- Impedance @ -10 dBu:
  - Balanced: 1 kΩ
  - Unbalanced: 500 Ω
- Max Output Level:
  - >+21 dBu balanced/unbalanced into 2 kΩ or greater
  - >+18 dBm balanced/unbalanced (into 600 Ω)

Compression:
- Threshold Range: -40 dBu to +20 dBu
- Threshold Characteristic: Selectable OverEasy or hard knee
- Compression Ratio: 1:1 to Infinity:1
- Attack Time: Scalable Program-Dependent AutoDynamic
- Release Time: Scalable Program-Dependent AutoDynamic

System Performance:
- Bandwidth: 0.35Hz to 90kHz, +0.5/-3 dB
- Frequency Response (Flat): 20Hz to 20kHz, +0/-0.5 dB
- Noise: <-93 dBu, unweighted (22kHz measurement bandwidth)
- THD + N: <0.2%; Any Amount of Compression @1kHz
- Intermodulation Distortion: <0.2% SMPTE
- Dynamic Range: >114 dB, unweighted
- Interchannel Crosstalk: <-95 dB, 20Hz to 20kHz
- CMRR: >40 dB, typically >55 dB at 1kHz
- Stereo Coupling: True RMS Power Summing

Electrical:
- Operating Voltage: 100-240VAC 50/60Hz
- Operating Temperature: 0°C to 45°C (32°F to 113°F)
- Power consumption: 15W
- Mains Connection: IEC receptacle

Physical:
- Dimensions (W x H x D): 483 x 44.5 x 14.6 mm / 19 x 1.75 x 5.75 inches
- Weight: 2.19 kg / 4.84 lbs

Further Product Information Below