FBT Amico 10USB Processed Active Sound System, 2x 150W Speakers with 500W Sub Woofer

The FBT Amico 10USB Processed Active Sound System is a 3-way, tri-amplified Bass-Reflex system. The new AMICO 10USB is a completely integrated, ready-wired sound system offering a convenient plug and play solution for Houses of Worship, church youth group events, school classrooms, auditoriums and various school activities, business conferences and small musical groups performing live in small to medium sized venues.
The mixer, amplification and subwoofer are contained in a single ultra lightweight, yet extremely sturdy polypropylene enclosure.A storage compartment in the rear of the Amico 10USB houses the systems two 2- way satellite speakers, allowing the wheeled system to be transported as a one piece unit.
The AMICO 10USB features a built in professional mixer with 14 input channels and power amp outputs. Built-in mixing console with 6 x XLR mic inputs with phantom power supply, 2 x mono inputs and 4 x stereo input channels, 3-band EQ, 99 selectable digital effects with effects send and return controls, 1 x effects send, 1 x monitor send, headphone jack out and master volume control.
The enclosure features a speaker grille on the front. A cover, also acting as a towing handle, hinges off the top, to reveal a mixer set horizontally, with its connections facing to the rear. The rear cover detaches to allow access to two storage shelves into which satellite speakers, where included, press fit for storage, and the power amplifier, with connectors facing to the rear; two NL4 speaker connectors for the satellite speakers and an IEC power inlet with associated fuse.
The FBT Amico 10 USB features a USB connector to playback music programs/files from a computer or to record from the master audio output of the AMICO 10 USB to a computer-recording program.

FBT Amico 10USB Processed Active Sound System, 2x 150W Speakers with 500W Sub Woofer Features

- 3-way, tri-amplified Bass-Reflex system
- 14 channel mixer with 99 presets digital multi effect and phantom power
- USB connection for music programs in play and record
- Subwoofer: 380mm (15 inch) high efficiency and high excursion custom neodymium magnet woofer with a 75mm (3 inch) voice coil
- 2 x Two way satellite speakers: featuring 165mm (6.5 inch) neodymium magnet woofers with 38mm (1.5 inch) voice coils, and a 25mm (1 inch) compression driver coupled to a 90°H x60°V constant directivity horn
- 500W rms Class D amplifier for subwoofer
- 2 x 150Wrms Class D amplifier for the satellite speakers
- Switch mode power supply

FBT Amico 10USB Processed Active Sound System, 2x 150W Speakers with 500W Sub Woofer Specifications

- Configuration: 3 WAY / SUB+2SAT
- Internal Amplifiers: 1x 500 + 2x 150 W RMS
- Mixer Channels: 2 mono + 4 stereo

Mono Channels:
- Microphone
  - Quantity and type: 2 x XLR F
  - Impedance: 2,2 kohm
  - Max input signal: 0 dBu
  - Max gain: 75 dB
  - Equivalent input noise: -128 dB
  - CMRR (@ main out, gain 75dB): -80 dB
- Line
  - Quantity and type: 2 x JACK balanced
  - Impedance: 33 kΩ
  - Max input signal: 30 dBu
  - Max gain (@ main out): 40 dB
- Tone
  - High Shelving (@ 12kHz): ±15 dB
  - Medium Peaking (@ 2,5kHz): ±12 dB
  - Low Shelving (@ 80Hz): ±15 dB

Stereo Channels
- Microphone
  - Quantity and type: 4 x XLR F
  - Impedance: 22 kΩ
  - Max input signal: 0 dBu
  - Max gain: 75 dB
  - Equivalent input noise: -128 dB
  - CMRR (@ main out, gain 75dB): -80 dB
- Line
  - Quantity and type: 8 x JACK balanced
  - Impedance: 22 kohm
  - Max input signal: 30 dBu
  - Max gain (@ main out ): 18 dB
- Tone
  - High Shelving (@ 12kHz): ±15 dB
  - Medium Peaking (@ 2,5kHz): ±12 dB
  - Low Shelving (@ 80Hz): ±15 dB

Outputs
- Impedance: 600 Ω
- Mx output (Monitor, Eff, Tape In): 22 dBu
- Distortion + Noise @ 16 dBu: 0,025%
- Signal/Noise ratio: 96 dB
- Frequency response (@ 0 / -1dB): 20Hz - 20kHz

Built In Effect
- Sample frequency: 48 kHz
- Frequency response: 20Hz - 20kHz

Satellite Speaker
- Configuration: 2 Way
- Internal amplifier / Recommended: -/150 Wrms
- Impedance: 4 Ω
- Frequency response: -6dB 90Hz - 20kHz
- Sensitivity (@1W, 1m): 93,5 dB
- Maximum SPL (cont-peak): 115/125 dB
- Dispersion: 90° x 60° H x V
- Low frequency woofer: 1x6,5 inch
- High frequency driver: 1x1 inch
- Input connectors: 1 x SPEAKON
- Power supply cable: 5m / 197 Inch
- Net dimensions (WxHxD): 478 x 780 x 433mm / 18,8x30,7x17 Inch
- Net weight: 34 kg / 74 lb
- Transport dimensions (WxHxD): 570 x 880 x 570mm / 22.4 x 36.5 x 22.4 Inch
- Transport weight: 38 Kg / 81.6 lb
- Supplied accessories: Carrying cover, twin cables, 2 aluminium stands

Sub Woofer
- Configuration: 1 Way
- Internal amplifier: 500W SUB + 2 x 150W SAT Wrms
- Frequency response @-6dB: 40Hz - 120Hz
- Sensitivity (@1W, 1m): 97 dB
- Maximum SPL (cont-peak): 124/130 dB
- Dispersion: Omni-directional O x V
- Low frequency woofer: 1x15 inch
- SAT output connectors: 2 x SPEAKON