Nexo RS18 Raysub Install Subwoofer

Nexo RS18 Raysub Install Subwoofer

Ref: JP18408

Nexo RS18 Raysub Install Subwoofer

The Nexo RS18 Raysub Install Subwoofer uses two 18-inch long excursion Neodymium drivers drivers in a low profile cabinet to extend system response down to 30Hz. NEXO's patent pending RAY SUB Technology is based on optimising the positioning and phase relationships of radiating surfaces in vented enclosures, permitting acoustic distance from rear to front sections to always increase as frequency decreases. Consequently rear and front sections sum up efficiently over the entire subwoofer bandwidth, allowing for an average of 5dB gain from the rear section in the forward direction and cancelling in the rear direction.


Nexo RS18 Raysub Install Subwoofer Features

- Low profile, high output, modular scalable bass
- Configurable directivity pattern
- Cardioid pattern reduces rear levels by minimising rear/side wall reflections
- Aerodynamic profiled vents with 20db noise reduction and improved linearity at high SPL
- Frequency response 30Hz - 100Hz
- Sensitivity 105dB
- 2x 18-inch configuration
- Applies across entire NEXO Product Line


Nexo RS18 Raysub Install Subwoofer Specifications

- Frequency Response @ -3db:
  - Omni: 30 Hz - 100 Hz
  - Directional: 30 Hz - 100 Hz
- Usable Range @ -6db:
  - Omni: 29 Hz - 250 Hz
  - Directional: 29 Hz - 150 Hz
- Sensitivity 1W @ 1m:
  - Omni: 105 dB SPL Nominal
  - Directional: 103 dB SPL Nominal
- Peak SPL @ 1m:
  - Omni: 143 - 146 dB Peak (2x 1000W to 2x 2000W/8Ω)
  - Directional: 140 - 143 dB Peak (2x 1000W to 2x 2000W/8Ω)
- Dispersion: Omni & Directional pattern over the entire useable bandwidth depending on controller:
- Directivity Index [c]: 1.5 < Q < 2 1.7dB < DI < 3dB: Q=4.3 DI=5.3dB
- Crossover Frequency: From 75Hz to 100Hz
- Nominal Impedance: 2x 8Ω
- Recommended Amplifiers:
  - One amplifier channel is required for Omni mode operation, rated at 2000 to 4000 Watts into 4Ω
  - Two amplifier channels are required for Directional mode operation, each rated at 1000 to 2000 Watts into 8Ω
- Components: 2x 18-inch (46cm) long excursion neodymium 8Ω drivers
- Connectors: 4x NL4MP SPEAKON 4 pole on two connection plates (In & Through)
- Construction: Baltic Birch ply finish with textured black or white coating. Dark grey carpet finish also available

Physical:
- Dimensions (W x H x D): 1238 x 520 x 732 mm
- Weight:
  - Net: 90 kg
  - With Handles: 105 kg
  - With Rigging System: 126 kg




For Product Information & Pricing please Click Here Contact us for more images if needed