JTS SIEM-2 In Ear Monitoring Complete System, SIEM-2T, SIEM-2R & IE1 (Channel 70)

The JTS SIEM-2T In Ear Monitoring Complete System Channel 70 (Siem-2T, Siem-2R & IE1) offers a simple solution to cost effective stage monitoring. This is a complete system with transmitter, receiver and ear pieces.
The dual inputs assures all feeds are relayed to the stage performer flawlessly.
Multiple receiver are able to be used on stage for each member of the band to receive the shared mix, each member can control the volume of the mix with the body pack volume control.

JTS SIEM-2 In Ear Monitoring Complete System, SIEM-2T, SIEM-2R & IE1 (Channel 70) Features
JTS SIEM-2T & JTS SIEM-2R Transmitter Features

- Developed with JTS advanced wireless technology
- Wired and wireless design for ambience
- UHF PLL 16 selectable channels
- Over 60 meters of stable operation distance
- Outstanding signal to noise ratio
- Light weight engineering plastic chassis
- Built in limit to protect hearing
- Very affordable
- Ø6.3mm Line / mic input.

JTS IE-1 Earphones Features

- This wideband dynadriver earphone reproduces full range of frequency, natural mids, and full highs and bass. It delivers sound musicians want and should be heard with full detail
- Three pairs of silicon sleeve are provided with different sizes for best fitting and sound isolation
- Human friendly mechanical structure ensures long time fatigueless wearing
- Ergonomic design for long-time wearing without fatigue

JTS SIEM-2 In Ear Monitoring Complete System, SIEM-2T, SIEM-2R & IE1 (Channel 70) Specifications

- Carrier Frequency Range: Channel 70, 863 - 865 MHz (License Free)

JTS SIEM-2T Transmitter Specifications

- Operation Voltage: 12-18V DC, 600mA
- RF Outputs: 10mW
- Frequency Deviation: ±40KHz
- LED Display: AF Level, Channel
- Carrier Frequency Range: Channel 70, 863 - 865 MHz (License Free)
- Audio Input Impedance: 20 kΩ
- Norminal Input Level: -20dBV
- Audio Input Connector: 2x Balanced XLR
- Loop Out Connector: 2x 6.3mm Balanced Loop out socket
- Nominal Input Level Max: 0 dBV

JTS SIEM-2R Receiver Specifications

- Frequency Preparation: PLL Synthesized Control
- Carrier Frequency Range: Channel 70, 863 - 865 MHz (License Free)
- LED Display: Channel
- Controls: Power On/Off, Channel selection, Volume control
- Audio Frequency Response: 40~18,000 Hz
- Output Connector: 1/8 inch Dummy stereo Phone Jack
- Battery life: 14 hours typical
- Battery: 2 AA batteries

JTS IE-1 Earphones Specifications

- Frequency Response: 20~20,000 Hz
- Transducer Type: Dynamic
- Impedance: 16 Ω
- Sensitivity (at 1000Hz): 114 dB/mW
- Distortion: Less than 0.3%
- Cord Length: 148cm with 3.5Ø stereo plug
- Net Weight: 6 grams (cable excluded)