SigNET AC AKW2/H Places of Worship Induction Loop Kit with SigNET PDA200E Amplifier and AMR/HA Hand Held Radio Microphone

Ref: JP87117

SigNET AC AKW2/H Places of Worship Induction Loop Kit with SigNET PDA200E Amplifier and AMR/HA Hand Held Radio Microphone

The SigNET AC AKW2/H Places of Worship Induction Loop Kit with SigNET PDA200E Amplifier and AMR/HA Hand Held Radio Microphone is a powerful and very cost-effective induction loop kit, designed specifically for places of worship. The AKW1 includes the PDA200E amplifier, which can cover up to 200 square metres of open space.
The kit is Fully compliant with BS 7594, clause 10 A3 and BS EN 60118-4 when correctly installed and feature two balanced/unbalanced line level inputs. In addition, the system also features one microphone input with phantom power for electret microphones.

SigNET AC AKW2/H Places of Worship Induction Loop Kit Supplied With

- SigNET AC PDA200E Amplifier
- SigNET AC AMR/HA Hand Held Radio Microphone
- SigNET AC APQM Outreach Plate with 6.35mm (¼-inch) Jack Input
- 2x SigNET AC APXM Outreach Plate with XLR Input
- 'AFILS fitted' sticker

SigNET AC AKW2/H Places of Worship Induction Loop Kit Features

SigNET AC PDA200E Amplifier
- A powerful and very cost-effective induction loop amplifier designed to drive a perimeter loop of up to 200 square metres
- Fully compliant with BS 7594, clause 10 A3 and BS EN 60118-4 when correctly installed
- Also available in a wide range of kit formats - suitable for use in meeting rooms, waiting rooms, TV?lounges, health and fitness suites, churches, etc
- Up to 200 metres (metal free) coverage - ideal for most 'free space' applications
- Features TWO balanced/unbalanced line level inputs and one microphone input with phantom power for electret microphones
- Ideal for electrical contractors - no audio connectors or experience required
- Metal compensation control to improve intelligibility in rooms with high metal content

SigNET AC APQM Outreach Plate with 6.35mm (¼-inch) Jack Input at Line Level
- Accepts balanced or unbalanced electret microphones with 6.35mm (1/4-inch) jack plugs
- Includes an on-board mic to line level converter, high gain pre-amplifier and 8V phantom power
- Can be connected to the balanced line level input of any audio system
- Fully cascadable - up to ten outreach plates can be daisy-chained to one balanced line level input
- Plates can be located at any convenient point on an installation
- Standard two-pair audio cable is ideal for most applications
- Network lengths of 100m easily achievable with no degradation of sound quality
- Built-in pre-amp, mixer and level controls included on all variants
- Overcomes the need for excessively long microphone and audio leads
- 12-32V dc operation
- +6dB overload capability
- Surface mountable on 25mm UK single gang back boxes
- Effectively acts as a multi-point distributed mixer with individual level controls
- Optional wall-mounting 'AFILS ACTIVE' and magnetic field strength indicators available for use with audio-frequency induction loop systems

SigNET AC AKW2/H Places of Worship Induction Loop Kit Specifications

SigNET AC PDA200E Amplifier
- Induction Loop Type: Wall mounting, requires fixed mains wiring
- Coverage: 200m² approx.
- Inputs:
  - 1x Microphone
  - 2x Line/Outreach
- Indicators:
  - Input level
  - Power
  - Compression
  - Peak Current (3,2,1)
- Controls:
  - Metal Compensation
  - Input level
  - Loop drive

Physical:
- Dimensions (W x H x D): 273 x 200 x 77mm
- Weight: 2.82kg

SigNET AC APQM Outreach Plate with 6.35mm (¼-inch) Jack Input at Line Level
- Supply volts: 12 to 37V regulated DC
- Supply current: 6 to 11mA
- Input signal level: -40dBu to -30dBu
- Input gain control: ∞ to 0dB
- Input impedance: 500Ω
- Signal to noise ratio: >60dB
- THD + noise: <0.07%

Physical:
- Dimensions (W x H): 85 x 85mm
- Weight: 0.075kg

For Product Information & Pricing please Click Here Contact us for more images if needed