Crown I-Tech 4x3500HD Drive Core Power Amplifier with Binding Post outputs, 4x2400W @ 4 Ohms or 70V / 100V Line

Crown I-Tech 4x3500HD Drive Core Power Amplifier Specifications

- Channels: 4
- Sensitivity: Adjustable in 0.1V increments from 1.28V to 8V
- Signal-to-Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted): > -112dB
- Total Harmonic Distortion (THD): 0.35%
- Damping Factor (10 Hz to 100 Hz): >5000
- Frequency Response (at 1W into 4/8 Ω): ± 0.25dB
- Crosstalk (below rated power 20Hz to 1kHz): > 80dB
- Common Mode Rejection (20Hz to 1kHz): > 80dB Typical
- Maximum Input Level (before input compression): +15dBu or +21dBu
- Load Impedance:
  - Stereo: 1/2/4/8/16/70V/100V
  - Bridge: 2/4/8/16/70V/100V
- Power (RMS):
  - 2Ω: 2100W
  - 4Ω: 2400W
  - 8Ω: 1900W
  - 4Ω bridged: 4200W
  - 2Ω bridged: 4800W
  - 70V: 2100W
  - 100V: 2300W
- Dimensions (HxWxD): 8.9cm x 48.3cm x 43.1cm (3.5" x 19" x 16.95")
- Net Weight: 29lbs (13.2kg)
- Net Shipping Weight: 36lbs (16.3kg)

Further Product Information Below