Crown DCi4 1250N 4-Channel Install Amplifier with BLU Link, 1250W @ 4 Ohms or 70V / 100V Line

Crown DCi4 1250N 4-Channel Install Amplifier with BLU Link, 1250W @ 4 Ohms or 70V / 100V Line Specifications

- Channels: 4
- Power:
  - 2Ω: 1250W
  - 4Ω: 1250W
  - 8Ω: 1250W
  - 16Ω: 625W
  - 70Vrms: 1250W
  - 100Vrms: 1250W
  - 4Ω bridged: 2500W
  - 8Ω bridged: 2500W
  - 16Ω bridged: 2500W
  - 140Vrms bridged: 2500W
- Frequency Response ( 8 Ω, 20 Hz - 20 kHz): ± 0.25 dB
- BLU Link Input Signal to Noise Ratio (A-Weighted): > 104dB
- Signal To Noise Ratio (A-weighted): > 108 dB
- Total Harmonic Distortion (at full rated power, 20 Hz - 20 kHz): 0.35%
- Voltage Gain: 34 dB
- Damping Factor (20 Hz to 100 Hz): >1000
- Input Impedance (nominal balanced, unbalanced): 10 kΩ, 5 kΩ
- Maximum Input Level before Compression: +20 dBu
- Maximum Input Level before Clipping: +26 dBu
- Load Impedance (Stereo/Dual Mode): 2 - 16 Ω, 70Vrms and 100Vrms
- Load Impedance Bridge Mono: 4 - 16 Ω, 140Vrms and 200Vrms
- Cooling: Continuously variable speed forced air, front to back airflow
- Maximum Fan Noise (re dBA SPL @ 1M): 45
- Required AC Mains: (± 10%)100V-240V ~ 50/60 Hz
- Power Connector: 20A IEC
- Dimensions: 19 x 3.5 x 17 inches (48.3 x 8.9 x 42.5 cm)
- Weight: 30lbs (13.60kg)

Further Product Information Below