DBX 560A Compressor/Limiter Module for DBX 500 Series

DBX 560A Compressor/Limiter Module for DBX 500 Series Specifications

- Input Type: Electronically balanced/unbalanced, RF filtered
- Input Impedance:
  - Balanced: 40kΩ
  - Unbalanced: 20kΩ
- Maximum Input Level: +22 dBu
- CMRR: >40 dB; typically >55 dB at 1 kHz
- Output Type: Electronically balanced/unbalanced, RF filtered
- Output Impedance:
  - Balanced: 30Ω
  - Unbalanced 15Ω
- Maximum Output Level: +22 dBu
- Frequency Response:
  - 20 Hz - 20 kHz, + 0/-0.5 dB
  - 0.5 Hz - 100 kHz, +0/-3 dB
- Noise: <-97 dBu, Unweighted (22 Hz - 22 kHz)
- THD+Noise:
  - <0.005% typical, No compression, 1 kHz input at 0 dBu
  - <0.07% typical, Any Amount of Compression up to 40 dB @ 1 kHz
- Dynamic Range: >119 dB
- Compression Gain Adjustment Range: Variable from -20 dB to +20 dB
- Compressor Threshold Range: -40 dBu to +20 dBu
- Compressor Threshold Characteristic: Selectable OverEasy or Hard Knee
- Compressor Ratio: Variable 1:1 to ∞ :1 thru to -1:1; 60 dB Maximum Compression
- Compressor Attack Time: Program-Dependent; Typically 15ms for 10 dB, 5ms for 20 dB, 3ms for 30 dB
- Compressor Release Time: Program-Dependent; Typically 8ms for 1 dB, 80ms for 10 dB, 400ms for 50 dB; 125 dB/Sec Rate
- Rack System Compatibility: 500 Series Compatible Power-frame
- Rack Space: 1 Slot

Electrical:
- Power Requirements: ± 16V DC
- Power Current Draw: 60 mA per power rail
- Power Draw: 1.92 watts

Physical:
- Dimensions (W x H x D): 3.81 x 13.34 x 15.24 mm ( 1.5 x 5.25 x 6 inches )
- Weight: 0.59 kg ( 1.3 lbs )

Further Product Information Below