DBX DriveRack PA2 Complete Loudspeaker Management System

DBX DriveRack PA2 Complete Loudspeaker Management System Specifications

- Input:
  - 2x line inputs
  - 1x RTA Mic input
- Input Connectors:
  - 2x Female XLR line inputs
  - 1x Female XLR RTA Mic input
- Input Type: Electronically balanced/RF filtered
- Input Impedance: >50 kohm
- A/D Converter: dbx Type IV Conversion System
- CMRR: > 45 dB
- Mic Preamp Phantom Power: +15VDC (RTA)
- Mic Preamp Equivalent Input Noise (EIN): < -117 dB, 22Hz-22kHz, 150 ohm (RTA)
- Output: (6) Line Outputs
- Output Connectors: Male XLR
- Output Type: Electronically balanced, RF filtered
- Output Impedance: 120 Ω
- Max Output: +20 dBu
- A/D Dynamic Range: 112 dB A-weighted, 110 dB unweighted
- Type IV Dynamic Range: 123 dB with transient material, A-weighted, 22kHz BW; 121 dB with transient material, unweighted, 22kHz BW; 115 dB typical with program material, A-weighted, 22kHz BW
- Input Delay Length: 100ms
- Alignment Delay: 10ms per channel (60ms total)
- Sample Rate: 48kHz
- Dynamic Range: >110 dB A-weighted, >107 dB unweighted
- THD+Noise: 0.003% typical at +4 dBu, 1kHz, 0 dB input gain
- Frequency Response: 20Hz - 20kHz, ± 0.5 dB
- Interchannel Crosstalk: < -110 dB, -120 dB typical (input-to-output: < -100 dB)
- D/A Dynamic Range: 112 dB A-weighted, 110 dB unweighted

Electrical:
- Operating Voltage: 100-120VAC 50/60 Hz - EU: 220-240 VAC 50/60 Hz
- Power Consumption: 22 W

Physical:
- Dimensions (W x H x D): 482 x 44 x 146 mm / 19 x 1.75 x 5.75 inches
- Weight: 2.4 kg / 5.25 lbs

Further Product Information Below