B&C 5FG44 5-Inch Speaker Driver - 100W RMS, 8 Ohm

The B&C 5FG44 5-Inch Speaker Driver boasts legendary B&C technology made with their famously critical quality control, allowing loudspeaker designs with appropriately scaled performance.

B&C 5FG44 5-Inch Speaker Driver Features

- 200 W continuous program power capacity
- Waterproofed on front of cone
- 44 mm (1.7 inches) copper voice coil
- 63 - 6000 Hz response
- 92 dB sensitivity

B&C 5FG44 5-Inch Speaker Driver Specifications

- Nominal diameter: 127 mm (5.0 inches)
- Nominal impedance: 8 Ω
- Minimum impedance: 6.5 Ω
- Nominal power handling: 100 W
- Continuous power handling: 200 W
- Sensitivity (1W/1m): 92.0 dB
- Frequency range: 63 - 6000 Hz
- Voice coil diameter: 44 mm (1.7 inches)
- Winding material: Copper
- Former material: Kapton
- Winding depth: 9 mm (0.35 inches)
- Magnetic gap depth: 6 mm (0.25 inches)
- Flux density: 1.1 T
- Connection: Spade Terminals

Design:
- Surround shape Roll
- Cone: shape Exponential
- Magnet material: Ferrite
- Spider: Single
- Pole design: T-Pole
- Woofer cone treatment: WP Waterproof Front Side
- Recommended enclosure: 5.0 dm³ (0.17 ft³)
- Recommended tuning: 70 Hz

Parameters:
- Fs: 63 Hz
- Re: 5.8
- Qes: 0.3
- Qms: 10.0
- Qts: 0.27
- Vas: 6.3 dm³
- Sd: 95.0 cm²
- η₀: 0.55 %
- Xmax: 3.0 mm
- Xvar: 5.0 mm
- Mms: 12 g
- Bl: 10.0 Txm
- Le: 0.8 mH
- EBP: 210 Hz

Physical:
- Overall diameter: 135 mm
- Bolt circle diameter: 142 mm
- Baffle cutout diameter: 122.0 mm
- Depth: 77 mm
- Flange and gasket thickness: 9 mm
- Air volume occupied by driver: 0.5 dm³
- Net weight: 1.6 kg