FBT Vertus DLA 1244A 2-way Active Line Array Column, 800W

The FBT Vertus DLA 1244A 2-way Active Line Array Column is composed of 12x 4 inch loudspeakers and 4x 1 inch dome tweeters combined with a waveguides to improve efficiency, 16x 50W power amplifiers deliver 126dB SPL. Digital vertical steering of the audio is achieved via rear control or via PC. Power connection through neutrik Powerconn.
Built in an elegant aluminium scratch resistant cabinet, DLA is an active steerable array system that provides exceptional intelligibility in highly reverberant environments. The characteristics of the lobe radiation directional controls, the high SPL, the HI-FI frequency range, the elegance and overall dimensions, make the DLA system particularly suitable for high quality sound even in acoustically challenging environments whilst the aesthetics compliment any environment. The design of the wavefront has the effect to soften off approx. 3dB whilst doubling the distance from the source.
The ability to change the vertical dispersion characteristics is ideally suited to reverberant environments where the audio is able to be digitally steered to the audience and away from reflective ceilings and floors. It is also invaluable where different dispersion control is required at different times, for instance where tiered seating is periodically used and the audience's listening position changes. When using the software connected through network cable, multiple scenes can be programmed and these recalled at the touch of a button.
The DLA 1244A with a 100Hz to 20kHz frequency response, is recommended for voice and high-quality music reproduction; it can be used in conjunction with our DLA 804A in order to create a full range system. Both DLA models have a dedicated SUB output to extend performance at low frequencies. The DLA system features a RS-485 network connection for total control through PC. Wall mount installation is possible with the the supplied bars.

FBT Vertus DLA 1244A 2-way Active Line Array Column Features

- High intelligibility even in reverberant environments
- Homogeneous SPL in the listening zone for better acoustic experience
- High direct to reverberant ratio
- Wide selection of directivity adjustments for a better adaptation to any environment
- Quick and simple setup even without a PC
- High quality transducers
- Modularity
- Elegant aesthetic design for the most demanding installations

FBT Vertus DLA 1244A 2-way Active Line Array Column Specifications

- Configuration: 16 Way
- Frequency response: 100Hz - 20KHz -6dB
- Low frequency woofer: 12x 4 inch (1 inch VC)
- High frequency driver: 4x 1 inch Neodynium
- Maximum SPL cont/peak: 123/126 dB
- Input impedance: 22 kΩ
- Crossover frequency: 3 KHz
- Input connector: Euroblock with loop and SUB OUT
- AC Power requirements: 650 VA
- Built-in amplifier (LF / HF):
  - RMS: 12x 50w / 4x 50w
  - Peak: 12x 100w / 4x 100w
- Dispersion (H x V): 100 degrees x Digitally Variable +30 degrees / -30 degrees (Vertical Beamwidth Angle 10 degrees - 40 degrees)
- Dimensions (WxHxD): 130 x 1685 x 131 mm
- Weight: 22 KG
- Transport Dimension (WxHxD): 220 x 1760 x 220 mm
- Transport Weight: 24.5 KG