FBT Ventis 112MA 2-Way 12-Inch Active Monitor, 900W

The FBT Ventis 112MA 2-Way 12-Inch Active Monitor is a dedicated floor monitor for use on small to medium-sized stages. This Active speaker features a a 12 inch coaxial custom woofer with 2.5 inch voice coil and B&C compression driver with 1 inch exit throat and 1.7 inch voice coil. The built in amp module features 700W + 200W delivering 129dB SPL. Optional brackets for installation are available.
The enclosure has a frequency response of 55Hz to 20kHz with 90° conical dispersion, while onboard DSP offers six factory presents for a broad range of scenarios. For flexibility in use, the monitor offers a 35mm (1.38 inch) stand socket, two integrated carrying handles and an optional wall mount bracket.
Alternatively, the passive 112M is rated at 400W into 8 Ohm delivering 129dB SPL, with a built-in passive crossover and speakon NL-4 In and Link Out connectors.

FBT Ventis 112MA 2-Way 12-Inch Active Monitor Features

- 2-Way 12-Inch bi-amplified, bass-reflex design
- 320 mm (12 inch) coaxial custom woofer with 64 mm (2.5 inch) voice coil, 25mm (1 inch) exit throat B&C with 44mm (1.7 inch) voice coil
- Frequency response from 55Hz to 20kHz
- DSP with 6 factory presets (ORIG, HI-CUT/DRUM-FILL, LO-CUT/DOUBLE, FOH, VOCAL, TOURING)
- 90° conical dispersion
- 35 mm (1.38 inch) stand socket, two integrated handles and optional wall mount bracket

FBT Ventis 112MA 2-Way 12-Inch Active Monitor Specifications

- Configuration: 2 way
- Built-in amplifier (LF/HF):
  - RMS: 700W / 200W
  - Peak: 1400 / 400W
- Frequency response: 55Hz - 20KHz -6dB
- Low Frequency woofer: 12 inch with 2.5 inch voice coil
- High Frequency driver: 1 inch with 1.7 inch voice coil
- Maximum SPL cont/peak: 126/133 dB
- Dispersion: 90° HxV
- Input impedance: 22 kΩ
- AC Power requirements: 640 VA
- Input connector: XLR with loop, RCA ST
- Power cord: 5 m
- Net Dimension (WxHxD): 563 x 311 x 452 mm
- Net Weight: 17.5 kg
- Transport Dimension (WxHxD): 663 x 411 x 552 mm
- Transport Weight: 22 kg