FBT Mitus 118FSA 18-inch Cardioid-Arrayable Flyable Active Subwoofer, 1200W - Front Version

The FBT Mitus 118FSA 18-inch Cardioid-Arrayable Flyable Active Subwoofer is an 18 inch, rear-paneled amplified subwoofer with 1200W RMS to 139dB SPL. It is equipped with a protective grille onis a cardioid arrayable and flyable subwoofer. It is designed and manufactured by FBT's renowned engineers and artisans, the Mitus 118FSA is a prime example of audio perfection with ergonomic innovations. The Mitus 118FSA is a hybrid loaded 18 inch neodymium subwoofer designed to suspend from a MT-F 212 flybar either facing forward (FSA model) or rearward (FSCA model).

FBT Mitus 118FSA 18-inch Cardioid-Arrayable Flyable Active Subwoofer Features

- Compact hybrid band pass cardioid-arrayable subwoofer. Hybrid configuration permit to obtain extension and speed of vented with high SPL and acoustic filtering of band pass
- Suspension hardware fully compatible with MITUS206La allowing the enclosure to be suspended front (FSA model) or rear-firing (FSCA model) for easy cardioid configurations
- Large area laminar-flow port to ensure no power compression and very low port turbulence
- For cardioid configurations with one SUB rear-firing and two sub front-firing, more than 15dB SPL rejection can be obtained behind the array
- 18 inch (460 mm) custom B&C neodymium magnet high excursion woofer with a 3.5 inch (88 mm) voice coil
- Frequency Response from 33Hz to 1Hz
- Class D amplifier delivering 1200W (RMS)
- Switch mode power supply
- DSP with 8 presets, cardioid and with infra configurations, delay
- Control panel with XLR input and link, volume, presets, delay, phase 0°-180°, ground-lift
- 5/8 inch (15mm) birch plywood enclosure, scratch resistant black paint
- Low frequency extension cabinet for the MITUS 206LA line array for flying or ground stacked configurations
- Very low profile for a 18 inch size woofer

FBT Mitus 118FSA 18-inch Cardioid-Arrayable Flyable Active Subwoofer Specifications

- Configuration: 1 Hybrid Bandpass way
- Built-in amplifier (LF / HF):
  - RMS: 1200W
  - Peak: 2400W
- Frequency response: 33Hz - 100Hz -6dB
- Low Frequency woofer: 1x 18 - 3.5 coil neodymium inch
- Maximum SPL cont/peak: 135/139 half space dB
- Dispersion: omnidirectional
- Input impedance: 22 kΩ
- Crossover Frequency: preset dependant KHz
- AC Power requirements: 640 VA
- Input connector: XLR with loop
- Power cord: 5 m
- Net Dimension (W x H x D): 576 x 538 x 756 mm
- Net Weight: 45 kg
- Transport Dimension (W x H x D): 700 x 690 x 800 mm
- Transport Weight: 55 kg