FBT Mitus 114 14-inch Passive Speaker, 700W @ 8 Ohms

The FBT Mitus 114 14-inch Passive Speaker is a two-way passive reinforcement speaker system shall incorporate 1x 14 inch B&C neodymium woofer with 3 inch voicecoil and 1.4 inch exit B&C neodymium driver with 2.5 inch voice coil coupled to a rotatable 70 x 50 degree dispersion horn; thanks to the rotatable HF horn it is possible to create horizontal arrays of 2 enclosures for a total coverage of 120 degrees.
The FBT MITUS 114 shall meet the following performance criteria: Frequency response of 50Hz to 18kHz, Frequency sensitivity of 100dB, Maximum SPL of 132dB, Recommended power amplifier 700W RMS / 8 Ohm. The FBT MITUS 114 passive speaker feature 0.59 inch baltic birch plywood construction covered in a scratch & scuff resistant black finish; the front shall be protected by a heavy duty metal grille with anti- resonance spacers and exclusive synthetic cloth to protect the drivers. The hi-grade passive internal crossover featuring «soft-trip» circuitry protection of the LF woofer and HF driver. Input connectors shall be parallel wired Neutrik NL4 speakon. The 12 M10 anchoring points built into the cabinet allow the FBT MITUS 114 speaker to be surface mounted on ceilings and a standard 1.38 inch speaker stand socket allows the FBT MITUS 114 to be mounted on speaker stands.

FBT Mitus 114 14-inch Passive Speaker Features

- 15mm / 0.59 inch baltic birch plywood cabinet
- Recommended amplifier 700W RMS / 8 Ohm
- 14 inch B&C neodymium woofer with 3 inch voice coil
- 1.4 inch exit B&C neodymium driver with 2.5 inch voice coil
- 70° H x 50° V rotatable horn
- Input panel with 2 x Neutrik speakon NL-4MDV in & link
- SPL capability: 132dB
- 12x M10 fly points
- Completely Manufactured in Italy

FBT Mitus 114 14-inch Passive Speaker Specifications

- Configuration: 1 reflex way
- Recommended amplifier: 700 W RMS
- Long Term power: 350 W
- Short term power: 1400 W
- Nominal impedance: 8 ohm
- Frequency response: 50Hz - 18Khz -6dB
- Low Frequency woofer: 1x 14 inch with 3 neodymium voice coil
- High frequency driver: 1x 1.4 inch with 2.5 inch voice coil
- Sensitivity (@1W/1m): 100 dB
- Maximum SPL cont/peak: 128/132 dB
- Dispersion: 70° x 50° HxV
- Crossover Frequency: 1.4 KHz
- Recommended HP filter: 40hz - 24dboct
- Input connector: 2 x speakon NL4MD-V in&thru
- Net Dimension (W x H x D): 380x705x380 mm
- Net Weight: 22.9 kg