FBT Mitus 152 Passive Speaker, 800W @ 8 Ohms

The FBT Mitus 152 Passive Speaker is a two-way passive speaker system features 1x 15 inch B&C neodymium woofer with 3 inch voice coil and 2 inch exit B&C neodymium driver with 2.5 inch voice coil coupled to a rotatable 60° x 40° horn. The built in amplifier delivers 800W at 8 ohms with a 132dB SPL.
The FBT MITUS 152 shall meet the following performance criteria: Frequency response of 47Hz to 20kHz, Frequency sensitivity of 100dB, Maximum SPL of 132dB, Recommended power amplifier 800W RMS at 8 Ohm.
The FBT MITUS 152 passive speaker feature 0.59 inch baltic birch plywood construction covered in a scratch & scuff resistant black finish; the front shall be protected by a heavy duty metal grille with antiresonance spacers and exclusive synthetic cloth to protect the drivers.
The hi-grade passive internal crossover featuring "soft-trip" circuitry protection of the LF woofer and HF driver. Input connectors shall be parallel wired Neutrik NL4 speakon. The 12 M10 anchoring points built into the cabinet allow the FBT MITUS 152 speaker to be surface mounted on ceilings and a standard 1.38 inch speaker stand socket allows the FBT MITUS 152 to be mounted on speaker stands.

FBT Mitus 152 Passive Speaker Features

- Hi-grade passive internal crossover featuring "soft-trip" circuitry protection of LF and HF transducers
- Speakon NL - 4MDV connectors IN & LINK OUT
- 15mm / 0.59 inch baltic birch plywood cabinet
- Recommended amplifier 800W RMS / 8 Ohm
- 15 inch B&C neodymium woofer with 3 inch voice coil
- 2 inch exit B&C neodymium driver with 2.5 inch voice coil
- 60° H x 40° V rotatable horn
- Input panel with 2 x Neutrik speakon NL-4MDV in & link
- SPLcapability: 132dB
- 12x M10 fly points
- Completely Manufactured in Italy

FBT Mitus 152 Passive Speaker Specifications

- Configuration: 2 way
- Recommended amplifier: 800 W RMS
- Long Term power: 400 W
- Short term power: 1400 W
- Nominal impedance: 8 Ω
- Frequency response: 47Hz - 20KHz -6dB
- Low Frequency woofer: 1x 15 inch with 3 inch neodymium voice coil
- High frequency driver: 1x 2 inch with 2.5 inch voice coil
- Sensitivity (@1W/1m): 100 dB
- Maximum SPL cont/peak: 128/132 dB
- Dispersion: 60°x40° HxV
- Crossover Frequency: 1.2 KHz
- Recommended HP filter: 40hz - 24db/oct
- Recommended external filter:
- Input connector: 2 x NL4MD-V in & thru
- Net Dimension (W x H x D): 425 x 805 x 421 mm
- Net Weight: 32kg
- Transport Dimension (W x H x D): 550 x 915 x 560 mm
- Transport Weight: 35.5kg