FBT Mitus 215 Passive Speaker, 1600W @ 4 Ohms

The FBT Mitus 215 Passive Speaker is a two-way passive reinforcement speaker featuring 2x 15 inch B&C neodymium woofer with 3 inch voice coil and 2 inch exit B&C neodymium driver with 2.5 inch voice coil coupled to a rotatable 60° x 40° horn, delivering 1600W at 4 ohms with a 138dB SPL.
The FBT MITUS 215 passive speaker feature 0.59 inch baltic birch plywood construction covered in a scratch & scuff resistant black finish; the front shall be protected by a heavy duty metal grille with antiresonance spacers and exclusive synthetic cloth to protect the drivers.
The hi-grade passive internal crossover featuring "soft-trip" circuitry protection of the LF woofer and HF driver. Input connectors shall be parallel wired Neutrik NL4 speakon.
The 12 M10 anchoring points built into the cabinet allow the FBT MITUS 215 speaker to be surface mounted on ceilings.

FBT Mitus 215 Passive Speaker Features

- 15mm / 0.59 inch baltic birch plywood cabinet
- Recommended amplifier 1600W RMS / 4 Ohm
- 2 x15 inch B&C neodymium woofer with 3 inch voice coil
- 2 inch exit B&C neodymium driver with 2.5 inch voice coil
- 60° H x 40° V rotatable horn
- Input panel with 2 x Neutrik speakon NL-4MDV in & link
- SPLcapability: 138dB
- 12 x M10 fly points
- Completely Manufactured in Italy

FBT Mitus 215 Passive Speaker Specifications

- Configuration: 2 Way
- Frequency response: 47Hz - 20KHz
- Low frequency woofer: 2x 15 inch with 3 inch voice coils
- High frequency driver: 2 inch with 3 inch voice coil
- Maximum SPL cont/peak: 134/138dB
- Dispersion: 60° x 40° (HxV)
- Recommended amplifier: 1600 W RMS
- Long Term power: 800 W
- Short term power: 2800 W
- Input impedance: 4 Ω
- Crossover frequency: 1.2kHz
- Input connector: 2x Speakon NL4-MD-V In & Thru
- Net Dimension (W x H x D): 493 x 1245 x 471 mm
- Net Weight: 48kg
- Transport Dimension (W x H x D): 618 x 1355 x 610 mm
- Transport Weight: 53.5kg