FBT Mitus 215A Processed Active Speaker, 1350W

The FBT Mitus 215A Processed Active Speaker is a two-way active reinforcement speaker featuring 2 x 15 inch B&C neodymium woofer with 3 inch voice coils and a 2 inch exit B&C neodymium driver with 2.5 inch voice coil coupled to a rotatable 60° x 40° horn. Built in Amplifier delivering 1100W (LF) + 250W (HF) RMS with a 136dB SPL.
The FBT MITUS 215A shall meet the following performance criteria: Frequency response of 42Hz to 20kHz, Maximum SPL of 136dB, 1100W RMS + 250W RMS class D amplifiers.
The FBT MITUS 215A provides a DSP with 6 EQ presets. The FBT MITUS 215A feature 0.59 inch baltic birch plywood construction covered in a scratch & scuff resistant black finish; the front shall be protected by a heavy duty metal grille with anti-resonance spacers and exclusive synthetic cloth to protect the drivers. The control panel provides XLR input & link, level, preset, delay, HP filter.
The 12 M10 anchoring points built into the cabinet allow the FBT MITUS 215A speaker to be surface mounted on ceilings.

FBT Mitus 215A Processed Active Speaker Features

- 2-way, bi-amplified, bass-reflex design
- 2 x 380mm (15 inch) B&C neodymium magnet woofer with 75mm (3 inch) voice coil
- 50mm (2 inch) exit B&C HF driver with 64mm (2.5 inch) voice coil
- Frequency response from 42Hz to 20kHz
- Class D built-in amplifiers, 1100Wrms to the LF and 250Wrms Class G to the HF
- Switch mode power supply
- DSP with 6 EQ presets
- 60°H x 40°V rotatable HF horn
- Birch plywood enclosure, scratch resistant black paint finish
- Control panel with XLR input and link, volume, presets, HP filter, ground-lift
- 12 x M10 fly points and two FBT design aluminum handles
- Ideal for live sound reinforcement applications and permanent installations

FBT Mitus 215A Processed Active Speaker Specifications

- Configuration: Bi-amplified
- Built-in amplifier (RMS):
  - LF: 1100W
  - HF: 250W
- Frequency response: 42Hz-20Khz -6dB
- Low Frequency woofer: 2x 15 inch with 3 inch neodymium voice coil
- High Frequency driver: 1x 2 inch with 2.5 voice coil
- Maximum SPL cont/peak: 133/136 dB
- Dispersion: 60° x 40° HxV
- Input impedance: 22 kΩ
- Input connector: XLR with loop
- Power cord: 5m
- Net Dimension (W x H x D): 493 x 1245 x 471 mm
- Net Weight: 52.5 Kg
- Transport Dimension (W x H x D): 618 x 1355 x 610 mm
- Transport Weight: 58 Kg