Furman CN-3600S E SmartSequencer

Furman CN-3600S E SmartSequencer, The Furman CN-3600 SE is designed for commercial A/V installations in 220V-240V regions and combines robust control capabilities via SmartSequencing Technology, advanced AC protection, AC noise filtration, and optional compatibility with the BlueBOLT Remote Power and Energy Management Platform (BB-RS232 adaptor required, sold separately).

The new Furman CN-3600 SE is one of the first products to feature Furman's SmartSequencing technology, which allows large and complex A/V systems to be safely powered on and off with a simple press of a button or turn of a key, even by nontechnical personnel. SmartSequencing's bidirectional communications between installed units enables a primary unit to control and sequence multiple secondary units, ensuring multizone electronic systems are powered on and off safely and dependably from a single control point across an entire installation. Units can be connected via current loop at runs of more than 1,000 feet with backwards compatibility with Furman's legacy sequencers.

In addition, the Furman CN-3600 SE offers robust control options, equipped with RS-232 ports and command sets for integration with control systems. An optional RS-232-to-Ethernet adaptor (sold separately) adds full IP-addressability to the unit, allowing it to be controlled, programmed, and monitored from a smartphone, tablet, PC, or any Web-enabled device via Telnet, direct HTTP connection, or Panamax/Furman's BlueBOLT-hosted remote power and energy management platform.

Features

SmartSequencing technology allows large and complex Pro A/V systems to be safely powered on and off with a simple press of a button or turn of a key.
Multiple units may be daisy chained at runs of over 300 meters with bi-directional communications between units for sequencing on and off large and/or complex systems.
RS-232 compatibility provides command set integration with control systems. An optional RS-232-toEthernet adaptor for control, programming, & monitoring from any Web-enabled device via Telnet, direct HTTP connection, or Panamax/Furman's BlueBOLT platform.
Series Multi-Stage Protection (SMP) ensures zero downtime for mission-critical installations by safely absorbing, clamping and dissipating transient surges and spikes without damage to internal circuitry or connected equipment.
Extreme Voltage Shutdown (EVS) safeguards from catastrophic under-voltage (under 175V sustained) or over-voltage (over 275V sustained) conditions. Unit can be set to automatic or manual recovery after an EVS condition has subsided.
Linear Filtering Technology (LiFT) ensures maximum performance from connected equipment by reducing AC noise evenly across the audio & video bandwidth.
Security covers and sequence on/off key switch prevent unauthorized personnel from tampering with DIP switches or running/shutting down equipment.
Fire alarm shut off.
16 Amp total capacity.
15 Year Limited Product Warranty. See warranty policy documentation for terms and conditions.

Specifications

AC Voltage Input Range

180-270VAC, 50/60Hz

Maximum AC Current Rating

16 amps (Thermal breaker)

AC Cord

1.5mm2x3, 2.5m Long, black, IEC C19 Female to Schuko CEE 7/7 Male Plug

AC Receptacles

Rear Panel Outlets: 1 IEC C13 pair (Unswitched), 3 IEC C13 pairs (Sequenced, each pair is controlled by separate relay)
Front Panel: 1 IEC C13 (Unswitched)

Surge/Under-Overvoltage Protection

AC Surge Protection: Series Multi-Stage Protection SMP
Spike Protection Mode: Line to neutral, zero ground leakage
Spike Clamping Voltage: 375V peak @ 6,000 volts/3,000 amps
Response Time: 1 nanosecond
Maximum Surge Current: 6,500 Amps
AC Undervoltage Protection: EVS, 175VAC+/-3VAC
AC Overvoltage Protection: EVS, 275VAC+/-5VAC
AC Overvoltage Reset Modes: Manual and Auto-reset (configurable)

AC Filtering

LiFT
Noise Attenuation: Linear, 10dB @10KHz, 40dB@100KHz, 50dB@500KHz

Operating Temperature Range

5C (40F) to 40C (105F) degrees

Humidity Range

<90% rH (Relative Humidity)

User Interface

Keyswitch: Front panel, 3-position keyswitch (On, Off, Remote)
Keys: Included, 1 pair
Pushbutton Switch: Front panel, hidden by security cover
Circuit Breaker: Front panel, pushbutton, 20A Thermal Breaker
Front panel diagnostic indicators: Primary link, Secondary link, Ethernet, Remote off, Delay 1, Delay 2, Delay 3, Power, Protection OK, Extreme Voltage
Front Panel DIP Switches: Front panel. Hidden by security cover, 1 Minute Delay, 2 Minute Delay, 4 Minute Delay, Force Off NO/NC, 12V Mode On/Off BND Mode On,
Momentary/Maintained, Primary/Secondary, EVS Reset Auto/Manual
Potentiometer: Front panel, hidden by security cover, fine tune delay adjust

Control/Status/Triggering (Rear Panel):

Remote Terminal: +5-30VDC In, 12VDC (12mA) Out
SmartSequencing: Phoenix 4-Pin Connector, Screw Terminals, Primary & Secondary Links (Current Loop - 1000' nominal)
Remote Terminal: Phoenix 4-Pin Connector With Screw Terminals; +12V, STAT, REM, GND (Class 2 Wiring)
Force Off/Delay 3 Terminal: Phoenix 5-Pin Connector With Screw Terminals, FORCE OFF, DELAY 3 (Class 2 Wiring)
RS-232 Compatible: Yes, DB-9 Connector
IP Addressability: Optional, via BB-RS232 Ethernet/RS-232 Adaptor (sold separately) for IP control via Telnet, HTTP, BlueBOLT
Voltmeter: Available with RS-232/Ethernet option, ± 2VAC accuracy
Ammeter: Available with RS-232/Ethernet option, ±1A accuracy

Power Consumption (No Load):

10 Watts

Safety Agency:

NRTL-C, RoHS Compliant

For Product Information & Pricing please Click Here Contact us for more images if needed