JBL Control HST 5.25-Inch Wide-Coverage Speaker with Dual Tweeters, 100W @ 8 Ohms or 70V/100V Line - IP54, Black

The JBL Control HST 5.25-Inch Wide-Coverage Speaker with Dual Tweeters utilises JBL's patent-pending Hemispherical Soundfield Technology to achieve extremely wide coverage of the listening space along with eliminating the primary wall reflection that tends to cause inconsistent sound when speakers are attached to a wall. The wide hemispherical soundfield covers from wall to wall, allowing a single speaker to provide high-fidelity full-range sound to a large listening area. This can reduce the number of speakers needed for covering a space, lowering the overall cost for a sound system.

JBL Control HST 5.25-Inch Wide-Coverage Speaker with Dual Tweeters Features

- Provides extremely wide horizontal coverage that approaches 180°, covering a greater area with fewer speakers.
- Reduces the primary wall reflection, resulting in a flat frequency response and consistent sound character at all listening positions.
- Components: 5.25-inch CMMD woofer and two splayed ¾" fluid-cooled tweeters.
- 100 Watt power handling in direct 8Ω setting, plus built-in 60 Watt 70V/100V multi-tap transformer.
- High fidelity sound character with broad frequency response of 50 Hz - 20 kHz

JBL Control HST 5.25-Inch Wide-Coverage Speaker with Dual Tweeters Specifications

- Frequency Range (-10dB): 50 Hz - 20 kHz
- Frequency Response (±3 dB): 68 Hz - 18 kHz
- Coverage Angle: 180° H x 160° V (1 kHz - 2 kHz, nominal) 160° H x 150° V (ave, 1 kHz - 16 kHz)
- Directivity Factor (Q): 5.4 (1 k - 16 kHz)
- Directivity Index (DI): 7.2 dB (1 k - 16 kHz)
- System Power Rating (IEC):
  - 100 W (400 W peak), 2 hrs
  - 75 W (300 W peak), 100 hrs
- Sensitivity: 88 dB (Ave. 80 Hz - 20 kHz)
- Maximum SPL (1m):
  - Direct 8Ω: 108 dB (peaks of 114 dB)
  - 60 W Tap: 97 dB @ 60W
- Crossover Network: 1.6 kHz, 3rd order (18 dB/oct) high-pass to HF, 2nd order low-pass to LF
- Impedance: 8 ohms
- Transformer Taps:
  - 70V: 60W, 30W, 15W, 7.5W
  - 100V: 60W, 30W, 15W
- Drivers:
  - LF: CMMD ceramic metal matrix diaphragm cone, 25 mm (1 in) voice coil.
  - HF: Two splayed tweeters with CMMD-treated aluminum diaphragms, polyurethane surround, polyimide bobbin, neodymium magnet, and fluid-cooling.
- Enclosure: Fiberglass-reinforced ABS
- Attachment: Four M6 points for included U-bracket. Additional M6 insert point provided for adding secondary safety attachment cable. U-bracket must be utilized. Must be mounted on wall surface. Do not mount on pole.
- Grille: Aluminum grille, painted to match cabinet color.
- Input Connectors: Removable locking euro-block 4-pin connector with screw-down terminals for bare wire. Two pins for input and two pins for parallel loop-thru. Max. wire 12 AWG (2.5 mm2).
- Outdoor Capability: IP54 per IEC529. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for salt spray.
- Dimensions (H x W x D): 362 x 256 x 184 mm (14.25 x 10.1 x 7.2 in), cabinet 208 mm (8.2 in) depth with included bracket.
- Colors: Available in black (RAL9004) and white (-WH, RAL9016)
- Net Weight (each): 3.6 kgs (8.0 lb), 4.3 kgs (9.5 lb) with U-bracket

JBL Control HST 5.25-Inch Wide-Coverage Speaker with Dual Tweeters Supplied With

- JBL Control HST speaker
- U-bracket