JBL VRX932LA-1-WH 12-Inch 2-Way Passive Bi-Amp Line Array Speaker, 800W @ 8 Ohms - White

The JBL VRX932LA-1-WH 12-Inch 2-Way Passive Bi-Amp Line Array Speaker is a light-weight (46 lb / 21 kg) compact 12-inch two-way line array speaker system designed for use in arrays of up to six units. VRX932LA-1 is the ideal choice when line array performance is needed but the venue size doesn't call for the very long-throw characteristics of larger line arrays such as JBL's VERTEC.
The Constant Curvature waveguide mounts three compression drivers on a continuous arc. When additional VRX932LA-1-WH speakers are added to the array the uninterrupted arc continues. In effect, all the drivers work together as if they were a single driver on a very long waveguide. Since there are three drivers in each VRX932LA-1, the combined power handling and acoustic output of the system is far greater than a single driver could achieve.
VRX932LA-1 uses "amplitude shading" to shape the coverage of the array. Switches on the input plate allow, for example, the upper box in an array to reach a distant balcony while the lower HF section is shaded back to reduce excessive level at the front of the listening area.
One or two VRX932LA-1-WH's may also be used on a tripod or over subwoofers. The integral rigging hardware is used to securely lock the array together while the dual-angle pole socket provides aiming flexibility.
As many as six VRX932LA-1 speaker systems may be suspended in a single array for a nominal vertical coverage of up to 90°. Suspended applications require the JBL VRX-AF array frame (available separately). For applications in which the array must be aimed sharply down, a second array frame may be installed to the bottom of the array serving as a pull-back.
VRX918S subwoofers are the ideal choice for a ground-stacked or flown VRX932LA-1 system. The SRX718S subwoofer is also compatible when suspension is not required.

JBL VRX932LA-1-WH 12-Inch 2-Way Passive Bi-Amp Line Array Speaker Features

- JBL's exclusive neodymium magnet Differential Drive woofer for high-power capacity and light-weight.
- VRX932LA-1-WH features 3 x 2408J Annular Ring Diaphragm HF drivers. The 2408 represents the latest in JBL Professional compression driver design.
- Constant Curvature waveguide for unprecedented array coherence.
- Dual angle pole socket for aiming flexibility. One or two speakers may be mounted to a 35 mm pole or tripod stand.
- Integral rigging hardware for simple connection of enclosures and optional array frame. Arrays of up to six enclosures may be flown.
- Array Configuration Selector permits "array shading" in passive mode

JBL VRX932LA-1-WH 12-Inch 2-Way Passive Bi-Amp Line Array Speaker Specifications

- Power Rating: 800 W / 1600 W / 3200 W
- Frequency Range (-10dB): 57 Hz - 20 kHz
- Frequency Response (±3 dB): 75 Hz - 20 Hz
- Coverage Pattern: 100 x 15 nominal
- Crossover Modes: Bi-amp / passive, externally switchable
- Crossover Frequency: 132 dB SPL peak 1.2 kHz
- Maximum SPL (1m):
  - 130 dB SPL peak (passive mode)
  - LF: 130 dB
  - HF: 139 dB
- Sensitivity: Passive: 95 dB SPL Bi-amp LF: 95 dB SPL Bi-amp HF: 114 dB SPL
- Drivers:
  - LF: 1 x JBL 2262H 305 mm (12 in) Differential Drive woofer with neodymium magnet, dual voice-coils, and dual magnetic gaps.
  - HF: 3 x JBL 2408J, 38 mm (1.5 in) voice-coil, neodymium compression driver
- Nominal Impedance:
  - Passive: 8 ohm
  - Bi-Amp LF: 8 ohm
  - Bi-Amp HF: 8 ohm
- Active Tunings: Tunings available at www.jblpro.com
- Enclosure: 18 mm, 11-ply birch plywood
- Suspension / Mounting: Optional VRX932LA-AF line array frame kit
- Finish: Black DuraFlex finish
- Grille: Power coated, black, 16-guage perforated steel with with acoustically transparent foam
- Inputs: Neutrik Speakon NL-4 (x2)
- Outputs: 1 x XLR
- System Type: Constant Curvature 12" Two-Way Line Array System
- Dimensions (H x W x D): 343mm x 597mm x 376mm (13.5in x 23.5in x 14.8in)
- Net Weight (each): 21 kg (46 lb)
- Optional Accessories:
  - VRX932LA-AF: Suspension array frame SS2-BK: Tripod speaker stand
  - SS3-BK: Satellite speaker pole,41 in (1041 mm)
  - SS4-BK: Adjustable satellite speaker pole to be used with the SRX718S only