Showgear Flight Case for Wentex Pipe & Drape Kit with 450mm Base Plates

The Showgear Flight Case for Wentex Pipe & Drape Kit with 450mm Base Plates is designed to store the components of a complete Pipe & Drape FOH kit. With the contents of such a kit you can cover stages of up to 24 m (78 ft) wide.

Please Note: The Uprights need to be placed in the back of the case and the Drape Supports go in the front compartment. The Uprights need to be placed on top of each other with each layer facing the opposite direction from the previous one. Because of its weight, this case cannot be tipped. If you need a vertical solution, please have a look at our Pipe & Drape Transport Trolley (JP101680)

Showgear Flight Case for Wentex Pipe & Drape Kit with 450mm Base Plates Features

- Designed for Pipe & Drape
- Stores all components for a 19-m (62-ft) wide setup
- Hinged lid

Showgear Flight Case for Wentex Pipe & Drape Kit with 450mm Base Plates Specifications

Packing Capacity
- 8x Upright
- 8x Drape Support
- 12x Baseplate pin 100 or/and 200 mm
- 12x Baseplate

- IP Rating: IP20 (indoor use only)
- Material: Wood
- Material Thickness: 8 mm
- Fabric: Foam
- Colour: Black
- Handles:
  - Front
  - Back
  - Left side
  - Right side
- Handles Type: Recessed
- Castors: 6
- Castor Size: 100 mm
- Castor Type: Swivel with brake
- Latch Type: Butterfly
- Hinge Type: Fixed

Physical:
- Dimensions:
  - External (W x H x D): 2100 x 665 x 610 mm
  - Internal (W x H x D): 2050 x 385 x 559 mm
- Weight: 91.6 kg