Nexo STMi B112 12-Inch Bass Line Array Speaker

The Nexo STMi B112 12-Inch Bass Line Array Speaker is an injection-moulded bass cabinet featuring a Neodymium high excursion 3000W 12-inch bass driver with 4-inch voice coil. It has the same format – dimensions, weight, gravity centre – as the M46. The hybrid horn-loaded design maximizes the efficiency of the driver, delivering 6dB more than a standard front-loaded driver in this frequency range.
B112 features innovative PistonRig and REDLock rigging, enabling any size of system to be flown safely by one person. REDLock handle locks front rigging points from rear of cabinet. All adjustments made from one position at rear of cluster.

Configure the perfect system for every event. The concept of Scale Through Modularity (STM) delivers a new level of versatility, enabling contractors to design a wide range of systems from just 4 core modules. From system storage and configuration, through transportation and rigging, to wiring and amplification, STM delivers important operational and logistical cost savings at every stage of the process.

Nexo STMi B112 12-Inch Bass Line Array Speaker Specifications

- Frequency Response: 63Hz – 200Hz ±3dB
- Usable Range @-6dB: 55Hz – 250Hz
- Sensitivity 1W @ 1m: 107dB SPL Nominal
- Nominal Peak SPL @ 1m: 141dB Peak
- Nominal Impedance: 16Ω (12 Ω min)
- Amplified Controller: NXAMP4x4 - 3x STMi B112 in parallel on 2 NXAMP4x4 bridged channels (8000W / 4Ω)
- Electronic Controller: The NEXO NXAMP4x4 presets are precisely matched to the STM Series cabinets and include sophisticated protection algorithms. Using STMi Series cabinets without a properly connected NEXO NXAMP4x4 will result in poor sound quality and can damage components
- Driver: 1x 12-inch (30cm) 3000W high excursion Neodymium 16 Ohms driver
- Connectors: 2x NLT4-MDV Speakon 4 poles (in/out)
- Construction: PU Composite Low Density – Polyurethane water based black coating
- Fittings:
  - Handles: 2 handles (1 per side)
  - Rigging: Integral 3 points flying system. Inter cabinet angle adjustments from 0.2° to 10° in logarithmic steps

Physical:
- Colour: Black
- Front: Perforated Dark Grey Metal Grille
- Dimensions (W x H x D): 575 x 350 x 715 mm
- Weight: 59 kg