Nexo STMi M46 Quad 6.5-Inch Main Line Array Speaker

The Nexo STMi M46 Quad 6.5-Inch Main Line Array Speaker is an injection-moulded high-power cabinet with innovative components for enhanced performance. Flat-membrane drivers ensure completely even and full-range coverage over entire 90° horizontal dispersion. HF frequency range remains completely linear, using Ketone Polymer diaphragms that enhance tonal response and long throw.
M46 features innovative PistonRig and REDLock rigging, enabling any size of system to be flown safely by one person. REDLock handle locks front rigging points from rear of cabinet. All adjustments made from one position at rear of cluster.

Configure the perfect system for every event. The concept of Scale Through Modularity (STM) delivers a new level of versatility, enabling contractors to design a wide range of systems from just 4 core modules. From system storage and configuration, through transportation and rigging, to wiring and amplification, STM delivers important operational and logistical cost savings at every stage of the process.

Nexo STMi M46 Quad 6.5-Inch Main Line Array Speaker Specifications

- Frequency Response: 85Hz – 19kHz ±3dB
- Usable Range @-6dB: 80Hz – 20kHz
- Sensitivity 1W @ 1m: 110dB SPL Nominal
- Nominal Peak SPL @ 1m: 145dB Peak
- Dispersion: 90° Horizontal x 0-10° vertical
- Crossover Frequency: 1.5 Hz
- Nominal Impedance:
  - HF: 16Ω (12 Ω min)
  - LF-MF:16Ω (12 Ω min)
- Amplified Controller: NXAMP4x4 - 3x STMi M46 in parallel on 2 NXAMP4x4 channels (2x 4000W / 2Ω)
- Electronic Controller: The NEXO NXAMP4x4 presets are precisely matched to the STM Series cabinets and include sophisticated protection algorithms. Using STMi Series cabinets without a properly connected NEXO NXAMP4x4 will result in poor sound quality and can damage components
- Drivers:
  - HF: 4x 2.5-inch voice coil, 1.4-inch throat Neodymium 16 Ω drivers, Ketone Polymer diaphragm
  - LF-MF: 4x 6.5-inch (17cm) 16 Ω flat membrane high excursion drivers
- Connectors: 2x NL8-MDV Speakon 8 poles (in/out) & 1x NLT4-MDV Speakon 4 poles (to STMi S118 and B112)
- Construction: PU Composite Low Density – Polyurethane water based black coating
- Fittings:
  - Handles: 2 handles (1 per side)
  - Rigging: Integral 3 points flying system. Inter cabinet angle adjustments from 0.2° to 10° in logarithmic steps

Physical:
- Colour: Black
- Front: Perforated Dark Grey Metal Grille
- Dimensions (W x H x D): 575 x 350 x 715 mm
- Weight: 59 kg