Biamp E-VOL60 Mono Remote Volume Control - 100V, 60W

The Biamp E-VOL60 Mono Remote Volume Control is a 100 volt volume control. It can handle up to 60 watts of power. It is very versatile thanks to the step-by-step attenuation in 11 steps + zero position. The E-VOL60 is designed to handle 24V priority signals. This means that you can always get an announcement out, even to zones where the local volume control is in the ‘OFF’ position!
If your amplifier has a 24V priority output, it will send a 24V signal when you push the talk button on the microphone. The 24V signal will close a relay on the E-VOL60 volume control, and the signal will pass, even when the volume control is in the ‘OFF’ position. This can be very useful for emergency or evacuation messages. The E-VOL60 is built on a universal chassis that easily can be integrated with Gira, Jung and Euro.

Biamp E-VOL60 Mono Remote Volume Control Features

- 100 volt volume control
- Up to 60 watts of power
- Finish: White
- Best installed with the E-MODON (surface box) or E-MODIN (in-wall box)

Biamp E-VOL60 Mono Remote Volume Control Specifications

- Stereo/mono: mono
- Applicable 100V: Yes
- Steps: 0 + 11
- Mounting: screw
- Max. cable in mm²: 2.5
- Applicable low impedance: No
- Max. power in watts: 60
- 24 volt priority relais: Yes
- Connector type: euroblock 6-pole

Physical:
- Dimensions (W x H x D): 80 x 80 x 50 mm
- Weight: 0.336 kg