JTS 8 Way UF-20R Pick 'n' Mix Rack System - Channel 38

The JTS 8 Way UF-20R Rack Pick 'n' Mix System comprises of 4 x UF 20 dual receivers racked together in a shallow flight case. A handy metal lockable rack drawer is provided together with a Rear to Front cable set in order to mount the antennas on the front of the rack.

Please Note:
- Transmitters are sold separately. See related links for options.
- This will be supplied as individual items boxed to reduce the risk of transit damaged - so you will need to assemble the receivers into the rack.

Set up Tip: ID / Label the radio transmitters channel 1 to X number, then tune the receivers as per the Group and Channel allocation table- Power up the transmitters 1 at a time and place them 3M away from the rack, you can then use the Remo set function to sync the transmitter to the Receiver.

JTS 8 Way UF-20R Rack System Pick 'n' Mix Features

- UHF True diversity technology renders 200-480 meters of operation distance
- Maximum 2400 to 3000 selectable frequencies across 60 to 75 MHz
- Preset 15 groups each of up to 63 compatible channels
- User programmable 6 groups each of 64 channels
- Free space scan function
- JTS Patented obstacle-free RF function synchronizes a transmitter by pushing a button
- JTS LCX circuit design technology minimizes Companding noise
- REMOSET - This now not only sends the frequency data but also the transmitter's RF power, sensitivity, low cut, key lock and user's name
- RF "NO SIGNAL" alert function
- AF "MUTE" alert function
- Transmitter "LOW BATTERY" alert function
- Built in equalizer
- Power / Antenna cascading output provided

JTS 8 Way UF-20R Rack System Pick 'n' Mix Specifications

- Carrier Frequency Range: Channel 38, 606.5 - 630 MHz (License Required)
- Audio frequency range: 50-18,000 Hz
- Channels: 2
- THD: < 0.5%
- Dynamic range: > 108 dB
- Admiss. ambient temp.: 0-40 °C
- Audio signal receiver:
  - 100 mV XLR,
  - 100 mV jack
- Power supply: 100-240 V/50-60 Hz/25 VA
- Width: 480 mm
- Height: 44 mm
- Depth: 214 mm
- Weight: 2.9 kg
- Connections:
  - 2 x XLR, balanced
  - 2 x 6.3 mm jack, balanced

Please Note:
- Transmitters are sold separately. See related links for options.
- This will be supplied as individual items boxed to reduce the risk of transit damaged - so you will need to assemble the receivers into the rack.

Set up Tip: ID / Label the radio transmitters channel 1 to X number, then tune the receivers as per the Group and Channel allocation table- Power up the transmitters 1 at a time and place them 3M away from the rack, you can then use the Remo set function to sync the transmitter to the Receiver.