Audio Technica ATW-1322 System 10 PRO Dual Rack Mount 2.4GHz Handheld Microphone System

The Audio Technica ATW-1322 System 10 PRO Dual Rack Mount 2.4GHz Handheld Microphone System works in 24-bit / 48 kHz, and allows easy use while ensuring clear and natural sound quality. The system offers three levels of diversity: frequency, time and space. Frequency diversity sends the signal to two frequencies allocated for communication without interference. The time diversity sends the signal in several time slots to optimize immunity against multipath interference. Finally, space diversity uses two antennas on each transmitter and receiver to maximize signal integrity.

Audio Technica ATW-1322 System 10 PRO Dual Rack Mount 2.4GHz Handheld Microphone System Features

- 2.4 GHz 24-bit / 48kHz Digital wireless system
- No interference, as operates outside of DTV or 3G bands
- Automatic Frequency Selection. Plug & Play. Ease of use and reliability
- Offers 3 levels of diversity (frequency, time and space) to ensure communication without interference
- Rackable metal chassis, comes with a removable receiver (Kit setting rack included)
- Supplied with 2 extractable receivers in the chassis, and two handheld microphone transmitters
- Possibility of 2 interchangeable receivers per chassis
- Users can pair each receiver with up to 10 transmitters
- 2 frames or 4 receivers can fit in a 19-inch 1U rack
- Possibility to chain up to 5 frames (10 receivers) using RJ12 type cables (one cable per system)
- Up to 10 systems can be used simultaneously without any frequency coordination problems or group selection
- Hi-Fi audio quality over the whole frequency range (20 Hz to 20 kHz)
- No compression during transmission and reception for clear, natural sound

Audio Technica ATW-T1002 System 10 2.4GHz Digital Handheld Microphone Features

- Handheld transmitter for System 10 / System 10 Pro
- Designed for performing musicians and presenters
- Easy setup and clear, natural sound quality
- System 10 offers extremely easy operation and instantaneous channel selection
- System 10 receivers and transmitters offer an easy-to-read digital ID display
- 2.4 GHz range - completely free from TV/ 3G interference
- Specially designed dynamic capsule
- Dual-colour LED power/battery/mute indicator
- The transmitter is powered by two AA batteries
- The power/mute button is placed at the end of the microphone to maintain a clean, uncluttered appearance

Audio Technica ATW-1322 System 10 PRO Dual Rack Mount 2.4GHz Handheld Microphone System Specifications

- Carrier Frequency Range: 2.4 GHz (License Free)

- Operating Frequencies: 2.4 GHz ISM band
- Frequency Response: 20 Hz to 20 kHz Depending on microphone type
- Operating Range: 60 m (200 feet) Open range env. with no interfering signals
- Dynamic Range: >109 dB (A-weighted), typical
- Total Harmonic Distortion: <0.05% typical
- Operating Temperature Range: 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures
- Audio Sampling: 24 bit / 48 kHz
- Latency: 3.8 ms
- Receiving System: Diversity (frequency/time/space)
- Output Connectors (Microphone): Remote Receiver Connector: RJ45
- Link Connector: RJ12
- Maximum Output Level: XLR, balanced: 0 dBV ¼-inch (6.3 mm), unbalanced: +6 dBV
- Power Supply: 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external

Physical:
- Dimensions (W x H x D): 209.8 x 44 x 169.3 mm
- Weight: 0.94 kg

Audio Technica ATW-T1002 System 10 2.4GHz Digital Handheld Microphone Specifications

- RF Power Output: 10 mW
- Spurious Emissions: Following federal and national regulations
- Battery Type: Two 1.5V AA
- Battery Life: >7 hours (alkaline) Depending on battery type and use pattern
- Dimensions (W x H x D): 50 x 254.8 x 50 mm

Audio Technica ATW-1322 System 10 PRO Dual Rack Mount 2.4GHz Handheld Microphone System Supplied With

- 1x Audio Technica ATW-RC13 Receiver Chasis
- 2x Audio Technica ATW-RU13 Receiver Module
- 2x Audio Technica ATW-T1002 Handheld Microhone Transmitter