elumen8 Tri-Rated 1.5mm Switchgear Cable, Grey - 100M

The elumen8 Tri-Rated 1.5mm² Switchgear Cable is intended for use in the wiring of switch, control, metering, relay and instrument panels of power distribution, switchgear and internal connections. It is intended for use at alternating voltages not exceeding 600V to earth, and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards, Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.

elumen8 Tri-Rated 1.5mm² Switchgear Cable Features

- Made in Britain
- Manufactured to: BS 6231 Type CK
- Underwriters Laboratory Listed
- This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C
- Spread of Flame: Tested to BS EN 60332-1-2, VW-1 and FT-1
- Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C

elumen8 Tri-Rated 1.5mm² Switchgear Cable Specifications

- Cross section: 1.5 mm²
- Max. current rating open air: 21 A
- Nominal stranding of conductor: 30/0.25 mm
- Nominal overall diameter: 3.3 mmØ
- Weight per m: 0.023 kg