NovaStar CVT 310 Fibre Convertor

The NovaStar CVT 310 Fibre Convertor for when you need to cover a large distance between your NovaStar processor and LED screen - the CVT 310 is the ideal solution for you. The NovaStar CVT310 can be used either as transmitter or as receiver. Due to the SFP/LC interface it is very easy to connect it to any fiber source.
To transfer signal from one sending-card output to the designated LED screen you always need two CVT310 units (TX transmitter and RX receiver). The fiber converter is plug and play and no further drivers are required.

NovaStar CVT 310 Fibre Convertor Features

- Fibre converter to cover large distances between processor and LED screens
- Transmission distance up to 300 m
- Plug and play, no driver required

NovaStar CVT 310 Fibre Convertor Specifications

Optical:
- SFP Module Fibre Connector Type: LC
- SFP Module(s) Included: Yes
- Fibre Mode: Multi-mode

Control and Programming:
- Control System: NovaStar
- Port Mapping: Software Based

Electrical Specifications and Connections:
- Power Supply: 100-240 V AC 50/60 Hz
- Power Consumption: 16 W
- Power Connector In: IEC
- Data Connector In: RJ45

Mechanical Specifications:
- Dimensions (W x H x D):
  - Including Handles: 149 x 132 x 38 mm
  - Without Handles: 119 x 132 x 38 mm
- Weight: 0.7 kg
- IP Rating: IP20 (indoor use only)
- Housing: Aluminium
- Colour: Black

Product Properties:
- Cooling: Passive

Thermal Specifications:
- Maximum Ambient Temperature: 60 °C
- Minimum Ambient Temperature: -20 °C
- Operating Humidity: 0-95 %rH