Ref: JP108819
The NovaStar CVT10-S Single Mode 10x GigaBit Ethernet to Fibre Converter is a cost-effective long distance transmission solution for medium to large LED screen applications. It converts up to 10 network signal cables into a single fibre cable. Its design enables you to install it easily, securely and reliably in a 19-inch rack or case with a 1 unit height.
The CVT10-S can be connected directly to processors which are equipped with fibre optic output such as the VX1000, MCTRL660 PRO, Phobos R5 and the MCTRL4K.
This LED screen fibre convertor can be used both as receiver or transmitter and can therefore also be used with other Novastar processors. You'll need two devices (TX/RX) when using a processor without fibre optic output.
The CVT10-S can be used for sending data of 10 individual 1 Gb signals to a distance of up to 10 km. It comes with a power cord, USB cable, 2x 10 G SFP (LC)modules, two supporting brackets (of which one with nuts), connecting piece, screws, 19-inch installation kit and assembling diagram.
NovaStar CVT10-S Single Mode 10x GigaBit Ethernet to Fibre Converter Features
- 2x 10G optical output (main + backup)
- 10x 1G ethernet port
- 19-inch / 1U design
- Transmission distance up to 10 km
- Single-mode
NovaStar CVT10-S Single Mode 10x GigaBit Ethernet to Fibre Converter Specifications
Outputs:
- Main Outputs: 10
Optical:
- SFP Slot Type: 10G
- SFP Slot Quantity: 2
- SFP Module Fibre Connector Type: LC
- SFP Module(s) Included: Yes
- Fibre Mode: Single-mode
- Maximum Transmission Distance: 10000 m
- Wavelength: 1310 nm
Electrical Specifications and Connections:
- Power Supply: 100-240 V AC 50/60 Hz
- Power Consumption: 22 W
- Power Connector In: PowerCON TRUE1
- Data Connector In: USB
- Data Connector Out: RJ45
Mechanical Specifications:
- Dimensions (W x H x D):
- Including Handles: 255 x 44 x 266 mm
- Without Handles: 212 x 44 x 266 mm
- Weight: 2.1 kg
- Rack Units: 1 U
- IP Rating: IP20 (indoor use only)
- Colour: Black
Thermal Specifications:
- Maximum Ambient Temperature: 55 °C
- Minimum Ambient Temperature: -20 °C
- Operating Humidity: 10-90 %rH
NovaStar CVT10-S Single Mode 10x GigaBit Ethernet to Fibre Converter Supplied With
- PowerCON TRUE1 cable
- USB-A - USB-B cable
- 19-inch Rack installation kit