JBL SRX900LA PB Pull Back Accessory Compatible with all JBL SRX900 LA Models

The JBL SRX900LA PB Pull Back Accessory Compatible with all JBL SRX900 LA Models is a lightweight pull-back bracket that can be used to implement pull-back of SRX906LA or SRX910LA arrays. The SRX906LA PB attaches to the bottom cabinet of an array and connects to a rear center suspension point to allow for more downtilt than would otherwise be possible using an SRX900 Series array frame alone. JBL's Line Array Calculator 3 software application is used to calculate the required downtilt angle. The SRX906LA PB can support the weight of up to 16 SRX906LA or 16 SRX910LA enclosures (depending on array geometry) and a 1/2-inch shackle (included) can be attached directly to the bracket. For more information about the suspension bar and use cases, refer to the SRX900 Series Rigging Manual.

JBL SRX900LA PB Pull Back Accessory Compatible with all JBL SRX900 LA Models Features

- Versatile pull-back accessory
- Compatible with SRX906LA and SRX910LA
- Support for up to 16 cabinets
- Lightweight design
- Shackle Size: ½-inch

JBL SRX900LA PB Pull Back Accessory Compatible with all JBL SRX900 LA Models Specifications

- Construction: High-grade steel with anti-corrosion coating
- Finish: Black powder coat
- Safe Limit: 9x SRX906LA or SRX910LA
- Maximum Limit: 16x SRX906LA or SRX910LA

Physical:
- Dimensions (W x H x D): 6 x 64 x 84 mm (0.2 x 2.5 x 3.3 inches)
- Weight: 0.1 kg (0.25 lbs)

JBL SRX900LA PB Pull Back Accessory Compatible with all JBL SRX900 LA Models Supplied With

- 1x Pull-Back Adapter
- 1x ½-inch Black Shackle