B&C 10PLB76 10-Inch Speaker Driver - 400W RMS, 8 Ohm, Spade Terminals

The B&C 10PLB76 10-Inch Speaker Driver boasts legendary B&C technology made with their famously critical quality control, allowing loudspeaker designs with appropriately scaled performance.

Recone Kit: JP61170 (B&C RCK10PLB76)

B&C 10PLB76 10-Inch Speaker Driver Features

- 800 W continuous program power capacity
- 76 mm (3 in) aluminium voice coil
- 50 - 2500 Hz response
- 98 dB sensitivity
- Alunimium demodulating ring allows a very low distortion figure

B&C 10PLB76 10-Inch Speaker Driver Specifications

- Nominal Diameter: 250 mm (10.0 in)
- Nominal Impedance: 8 Ω
- Minimum Impedance: 6.0 Ω
- Nominal Power Handling: 400 W
- Continuous power handling: 800 W
- Sensitivity (1W/1m): 98.0 dB
- Frequency Range: 50 - 2500 Hz
- Voice Coil Diameter: 76 mm (3.0 in)
- Winding Material: Aluminium
- Former Material: Glass Fibre
- Winding Depth: 20.0 mm (0.79 in)
- Magnetic Gap Depth: 8.0 mm (0.33 in)
- Flux Density: 1.1 T

Design:
- Surround Shape: Double Roll
- Cone Shape: Radial
- Magnet Material: Ferrite
- Spider: Single
- Pole Design: T-Pole
- Woofer Cone Treatment: None

Parameters:
- Resonance Frequency: 52 Hz
- Re: 4.8 Ω
- Qes: 0.2
- Qms: 3.4
- Qts: 0.19
- Vas: 31.0 dm³ (1.09 ft³)
- Sd: 320.0 cm² (49.6 in²)
- ??: 2.2 %
- Xmax: ± 6.0 mm
- Xvar: ± 7.0 mm
- Mms: 43.0 g
- Bl: 18.4 Txm
- Le: 0.32 mH
- EBP: 260 Hz

Physical:
- Overall Diameter: 262 mm (10.31 in)
- Bolt Circle Diameter: 245 mm (9.65 in)
- Baffle Cutout Diameter: 230.0 mm (9.06 in)
- Depth: 124 mm (4.88 in)
- Flange and Gasket Thickness: 14 mm (0.55 in)
- Air Volume Occupied by Driver: 2.6 dm³ (0.09 ft³)
- Net Weight: 7.8 kg (16.31 lb)