FBT Horizon VHA 118 SN INFINITO Conpatible Processed Active Subwoofer, 2500W

The FBT Horizon VHA 118 SN INFINITO Conpatible Processed Active Subwoofer is a unique low-end module that is capable of generating extremely high SPL for prolonged periods.
FBT HORIZON VHA 118SN is a direct radiation ground subwoofer, has 1x 18-inch long excursion woofer with 4-inch coil and 2500W Class D amplification capable of 143 dB SPL. The bass reflex cabinet offers substantial energy down to 30Hz and is ideal for extending and reinforcing the low frequencies of the HORIZON VHA system. It has presets to create various configurations with cardioid directivity, where some subwoofers face rearwards from the audience to acoustically cancel the sound pressure behind the cluster. The enclosure, optimised with BEM-type acoustic simulations to reduce resonance and turbulence of the ducts, is built in 0.70-inch ( 18mm ) birch plywood with black plyuria finish, has six alluminum handles, predisposition for 4 wheels, two M20 stand sockets for horizontal or vertical use and 4 support points set up to accommodate accessories in ground stack configuration in conjunction with VHA 406N and VHA 112SN models. The front of the speaker is covered with a powder coated perforated steel grille.
The summit of the entire project is the new 2500W amplification module with built-in TCP/IP network interface. Based on OCA ALLIANCE AES70 standard, it communicates with FBT's INFINITO management suite remote control software and receives 24-bit 48-96kHz digital audio streaming from all devices compatible with Audinate's DANTE standard. The HORIZON VHA 118SN is equipped with intelligent forced ventilation and OLED display with encoder for parameter settings.
A high-brightness blue front LED allows remote identification of the device also in daylight.

FBT Horizon VHA 118 SN INFINITO Conpatible Processed Active Subwoofer Features

- Bass-reflex amplified subwoofer
- 460mm (18-inch) high excursion B&C woofer with 100mm (4-inch) coil
- Frequency response from 30Hz to 100Hz
- 2500Wrms class D amplifier with switching power supply
- Network interface TCP/IP - AES70 compatible
- Ethercon RJ45 input and output for daisy-chain
- Remote control by INFINITO System Management Suite
- OLED DISPLAY and encoder with PUSH for easy onboard control
- DANTE audio streaming 24bit 48-96KHz
- Neutrik PowerCON IN and LINK power connectors
- Box in 18mm (0.7-inch) birch plywood with anti-scratch varnish
- Two M20 stand sockets and 4 FBT aluminum handles, predisposed for 4 x 100mm (4-inch) swivel casters
- Integrated mechanics compatible with VHA406N and VHA112SN for ground stack configurations.
- Extremely robust grid with protective fabric
- Ideal for reinforcing and extending the low range of the VHA system, it can only be used with VHA406N or as an infra if present also the VHA112SN

FBT Horizon VHA 118 SN INFINITO Conpatible Processed Active Subwoofer Specifications

- Configuration: Single Reflex
- Built-in Amplifier LF/HF: 3500
- Built-in Amplifier Peak LF/HF: 5000
- Frequency Response: 30Hz Preset Dependent
- Low Frequency Woofer: 1x 18-inch / 4-inch coil
- Maximum SPL Cont/Peak: 137 / 143dB half space
- Dispersion: Omnidirectional
- Input Connector: 2x XLR In / Out
- AC Power Requirements: 650 VA
- Power Cord: 5m

Physical:
- Dimensions (W x H x D): 606 x 700 x 720 mm
- Weight: 65 kg
- Transport Weight: 75 kg