Cloud DLM-1B Line/Mic Input Module with Dante - Black

The Cloud DLM-1B Line/Mic Input Module with Dante is from a range of remote mic/line input modules for use in a Dante-compatible network audio system. A DLM-1 module allows a microphone and/or a stereo music (or other line level) source to be connected at a remote location. The music input is mixed with the mic signal and the resulting output appears as a mono Dante channel at a standard RJ45 Ethernet port. Typically, the Dante channel will then be routed via the Dante network to the audio system (a Dante-equipped amplifier or mixer) feeding the speakers in the area where the module is fitted. Selectable mic-over-music priority is provided. The DLM-1 can be used in any Dante network, or Dante-compatible network. This includes the Cloud CA Series and CV Series of advanced multichannel power amplifiers when they are fitted with a CDI-CA or CDI-CV Dante interface card.

Cloud DLM-1B Line/Mic Input Module with Dante Features

- Remote mic/line input module, for use with all Dante-compatible networks
- AES67 compliant for interoperability with alternative (non-Dante) networks
- Easy connection to network via RJ45 and standard Cat 5 cable
- Powered via PoE - no local PSU required
- Network speed and activity LEDs (on RJ45)
- Balanced mic input (XLR) with level control
- Stereo, unbalanced line level input (phonos/RCA), with independent level control
- Alternative line input on 3-pole 3.5 mm jack socket
- Active mixing of mic and line signals
- Selectable mic-over-music priority
- Selectable hi-pass filter on mic input to reduce handling noise, etc.
- Multiple DLM-1s in the same Zone may be linked using Dante Controller

Cloud DLM-1B Line/Mic Input Module with Dante Specifications

Audio performance - Microphone Input:
- Sensitivity: -50 dBu nominal
- Gain range: 20 to 40 dB
- High pass filter: 120 Hz, 12 dB/octave
- Input headroom: 12 dB
- Frequency response: 20 Hz - 20 kHz +0.5 dB/-0 dB (HPF disabled)
- Noise: Noise gate inactive: -65 dBr, rel 0 dBFS output (Noise gate active: -95 dBr)

Audio performance - Line Inputs:
- Sensitivity:
  - via RCA/phonos: 0 dBu nominal
  - via 3.5 mm jack: -10 dBV nominal
- Maximum input level:
  - via RCA/phonos: +11 dBu
  - via 3.5 mm jack: +4 dBV
- Frequency response: 20 Hz - 20 kHz +0.5 dB/-0 dB
- Noise: -90 dBr, rel 0 dBFS output

Dante specifications:
- Dante transmit channels: 2
- Simultaneous receive flows: 2
- Dante receive channels: 2
- Simultaneous transmit flows: 2
- Sample rates:
  - Dante: 44.1 kHz, 48 kHz
  - AES67: 48 kHz
- Encoding: 16/24/32-bit PCM (default 24-bit)
- Data rates: 10 Mb/s, 100 Mb/s
- Connector: 1 x RJ45
- LEDs: Network speed (yellow), activity (green)
- Software compatibility
- Audinate Dante Controller (configuration and routing)
- Audinate DDM (security and domain management)

Electrical:
- Power requirements: Via PoE. A Class 1 (3.84 W max.) injector required for use with non-PoE switches.
- Power consumption: <1 W

Physical:
- Dimensions (W x H x D): 145 x 85 x 50 mm ( 5.71 x 3.35 x 1.97 inches )
- Weight: 0.35 kg ( 0.77 lbs )

Cloud DLM-1B Line/Mic Input Module with Dante Compatibility

- Cloud CA2250 Amplifier with Cloud CDI-CA2 Dante Network Expansion Card
- Cloud CA2500 Amplifier with Cloud CDI-CA2 Dante Network Expansion Card
- Cloud CA4250 Amplifier with Cloud CDI-CA4 Dante Network Expansion Card
- Cloud CA6160 Amplifier with Cloud CDI-CA8 Dante Network Expansion Card
- Cloud CA8125 Amplifier with Cloud CDI-CA8 Dante Network Expansion Card
- Cloud CV2500 Amplifier with Cloud CDI-CV2 Dante Network Expansion Card
- Cloud CV4250 Amplifier with Cloud CDI-CV4 Dante Network Expansion Card
- Cloud CV8125 Amplifier with Cloud CDI-CV8 Dante Network Expansion Card