JBL CWT128 2-Way Full Range Speaker with Waveguide Technology, 450W @ 8 Ohms or 70V / 100V Line - White

The JBL CWT128 2-Way Full Range Speaker with Waveguide Technology is a compact full-range 2-way system designed to provide extremely wide-angle coverage with maximum bandwidth and SPL in a single system package. The unique wide coverage pattern horn is designed to provide seamless coverage to 160-degrees horizontally. CWT128's small footprint makes the system ideal for nearly all architecturally sensitive environments, taking up about a third of the footprint of two speakers splayed side by side.

JBL CWT128 2-Way Full Range Speaker with Waveguide Technology Features

- Seamless horizontal coverage across a full 160°
- Compact size and small footprint make it ideal for architecturally sensitive environments
- Dual 205 mm (8 in) LF transducers
- Extremely wide-coverage 160° x 60° waveguide
- Dual 25 mm (1") exit, 38 mm (1.5") diaphragm compression driver
- Easy to install with 4 M10 attachment points built in across the top and sides
- 4 M8 points on the back panel accept OmniMount wall mounting brackets
- WRC and WRX weather resistant versions are available upon request

JBL CWT128 2-Way Full Range Speaker with Waveguide Technology Specifications

- System Format: Extremely Wide Angle Coverage Dual 8-inch 2-Way Loudspeaker System
- Frequency Range (-10dB): 71 Hz - 20 kHz
- Frequency Response (±3 dB): 96 Hz - 19 kHz
- Coverage Pattern: 160° x 60°
- Maximum SPL (1m): 129 dB
- System Nominal Impedance: 8 Ohms
- Long-Term System Power Rating: 450W (1800W Peak)
- System Power Rating:
  - Continuous: 850W
  - Program: 1700W
  - Peak: 3400W
- Crossover: 1.5 kHz
- Drivers:
  - LF: 2 x JBL 228J, 205 mm (8 in) SFG driver with 64 mm (2.5 in) edge wound voice coil
  - HF: 2 x 2408H-1 25 mm (1 in) exit compression driver, 38 mm (1.5 in) voice coil
- High-Frequency Waveguide: Crossfired Waveguide
- Finish: DuraFlex finish
- Crossover Modes: Passive
- System Sensitivity (1w @ 1m): 94 dB SPL
- Nominal LF Driver Impedance: 8 Ohms
- Transformer Taps:
  - 70V: 110W, 55W, *28W
  - 100V: 110W & 55W
- Enclosure: 12 mm and 15 mm exterior grade multi-ply hardwood plywood
- Suspension Attachment: 4 x M10 (1 x M10 points, one top, one bottom, plus 1 x M10 point on each side panel.) 4 x M8 rear for MultiMount MM-120-BT
- Environmental: Mil-Std 810; IPx3 per IEC529. For higher environmental ratings, use WRC or WRX.

Physical:
- Dimensions (W x H x D): 811.28 x 259.59 x 300.74 mm (31.94 x 10.22 x 11.84 in)
- Net Weight (each): 18.6 kg (40.9 lb)