JBL CSS-H30 Weather Resistant Paging Horn, 30W @ 8 Ohms or 70V / 100V Line - IP65

The JBL CSS-H30 Weather Resistant Paging Horn provides excellent voice range clarity for public address systems, announcement/paging, intercom, security, alarm and industrial applications. Designed for demanding environmental conditions, the CSS-H30 is highly weather resistant (IP-65 rated) so it can be used in either indoor or outdoor applications. The focused coverage pattern allows the horn to project the sound a farther distance than is the case with wider-coverage paging horns. Typical applications for this product are public access areas, warehouses, factories, schools, recreational facilities, commercial buildings, distribution centers, civic centers, and other commercial sound and protectivesignaling systems.

JBL CSS-H30 Weather Resistant Paging Horn Features

- Excellent voice range clarity for announcement and paging
- High sensitivity delivers high sound levels with minimal power amplification
- Wide 70° horizontal by 90° vertical coverage for medium throw applications
- Phenolic diaphragm driver for outdoor durability and high reliability
- UL-registered 15-watt multi-tap transformer, with 8 ohm direct bypass
- Built-in high-pass filter enhances reliability by protecting against low frequency damage
- Highly weather-resistant, with stainless steel bracket and hardware

JBL CSS-H30 Weather Resistant Paging Horn Specifications

- Frequency Range (-10dB): 380 Hz - 6 kHz
- Coverage Angle: 50° horizontal by 70° vertical (at 2 kHz and averaged 1 kHz - 4 kHz)
- Included High-Pass Filter: Passive 350 Hz high-pass filter built-in to protect against damage from frequencies below operational range.
- Directivity Factor (Q): 15.8 (2 kHz)
- Directivity Index (DI): 12 (2 kHz)
- Power Rating: 30 W (120 W peak), 100 hrs
- Sensitivity (1W, 2.83V@ 1m): 108 dB, ave. 1 kHz - 6 kHz; 112 dB at 1.4 kHz
- Maximum SPL (1m): 123 dB cont ave. (129 dB peak), 1 kHz - 6 kHz; 127 dB cont ave. (133 dB peak), 1.4 kHz, 30W input, 8 ohm setting
- Impedance:
  - 30W/70V, NC/100V tap: 167 ohms
  - 15W/70V, 30W/100V tap: 333 ohms
  - 7.5W/70V, 15W/100V tap: 667 ohms
  - 3.8W/70V, 7.5W/100V tap: 1333 ohms
  - 1.9W/70V, 3.8W/100V tap: 2666 ohms
  - 8 ohms at 8 ohm direct setting
- Transformer Taps:
  - 70V: 30W, 15W, 7.5W, 3.8W, 1.9W
  - 100V: 30 W, 15W, 7.5W, 3.8W
- Drivers: 38 mm (1.5 in) diameter with phenolic diaphragm
- Horn Material: ABS
- Mounting Hardware: Stainless steel powder-coated U-bracket (yolk) with 3 x 10.4 mm (0.41 in) dia mounting holes, stainless steel exterior hardware.
- Color: RAL9016 (horn and bracket)
- Input Connectors: 300 mm (12 in) pigtail to bare wire; entrance via watertight fitting. Wire colors: red = positive (+); black = negative (-).
- Outdoor Capability: IP-65 rating per IEC529, salt spray per B117, stainless steel U-bracket and exterior hardware.
- Safety Agency Ratings: Transformer UL Registered per UL1876 "Isolating Signal and Feedback Transformers for Use in Electronic Equipment"

Physical:
- Dimensions (H x W x D):
  - Horn: 206 x 285 x 287 mm (8.2 x 11.2 x 11.3 in)
  - Horn with Mounting Bracket: 224 x 285 x 287 mm (8.9 x 11.2 x 11.3 in)
- Net Weight (each): 4.5 lb/2.0 kg
- Shipping Weight (ea): 6.0 lb/2.7 kg