JBL Control GSF3 3-Inch Ground-Stake Landscape Speaker, Tan, 30W @ 8 Ohms or 70V/100V Line - IP56

The JBL Control GSF3 3-Inch Ground-Stake Landscape Speaker provides superior fidelity and wide coverage in a range of outdoor commercial applications, with a custom two-way coaxial 3-inch driver system that delivers full-range, crystal-clear sound. (Extend system bass response with JBL GSB8 or GSB12 in-ground landscape subwoofers.) This versatile speaker features a 15-watt multi-tap transformer for use on 70V/100V distributed systems, and is switchable for 8-ohm direct operation.
Versatile mounting options include an included ground stake for in-ground installation and an L-bracket for secure mounting on either horizontal or vertical surfaces. A low-profile, unobtrusive speaker, the GSF3 blends right into its surroundings, and is aimable for precise coverage via an adjustable hinge. Available in hunter green and tan finishes.
The elegant, discreet GSF3-winner of the prestigious RedDot international design award for industrial design excellence-is the perfect sound solution for diverse outdoor applications including shopping malls, theme parks, sports venues, hospitality venues, and any application calling for a stylish, robust, great-sounding landscape speaker system.

JBL Control GSF3 3-Inch Ground-Stake Landscape Speaker Features

- Transducers:
  - 76 mm (3-inch) woofer with polypropylene cone and 25 mm (1-inch) voice coil on Kapton voice coil former
  - 20 mm (0.8-inch) titanium dome tweeter with neodymium magnet assembly and Kapton voice coil former.
- Frequency range: 90 Hz - 20 kHz
- Power handling (at 8Ω setting): 30W continuous pink noise, 60W continuous program
- IP56 rated against water and dust ingress
- Multi-tap 15W transformer is switchable for 8Ω direct operation or use in 70V/100V distributed systems
- Bottom drip hole provides drainage for drivers
- Pairs well with JBL GSB8 and GSB12 in-ground landscape subwoofers
- Aimable via adjustable hinge
- Includes ground stake and L-bracket for surface mounting
- Includes tap selector located on bottom of speaker, away from water incursion
- UL1480A listed
- Available in hunter green or tan finish

JBL Control GSF3 3-Inch Ground-Stake Landscape Speaker Specifications

- Frequency Range (-10dB): 90 Hz - 20 kHz
- Frequency Response (±3 dB): 130 Hz - 17 kHz
- Power Rating:
  - 60 W Continuous Program (2 hrs)
  - 30 W (120 W Peak), Continuous Pink Noise (2 hrs)
  - 20 W (80 W Peak), Continuous Pink Noise (100 hrs)
- Sensitivity: 80 dB (120 Hz - 20 kHz)
- Maximum SPL: 101 dB peak (95 dB continuous, 2 hr) @ 1m
- Nominal Coverage: 80° conical
- Nominal Impedance: 8 Ω (at 8Ω tap)
- Transformer Taps:
  - 70V: 15 W, 7.5 W, 3.75 W
  - 100V: 15 W, 7.5 W
- Drivers:
  - 76 mm (3-inch) woofer, polypropylene cone 25 mm (1-inch) voice coil on Kapton voice coil former
  - 20 mm (0.8-inch) titanium dome, Neodymium magnet assembly, Kapton voice coil former
- Terminals: Bare wire with dielectric-gel-filled wire nuts (1 meter single jacked cable 2 wires with 18 AWG)

Physical:
- Enclosure Material: Polycarbonate + ABS, UL94V-0 flammability rated
- Colour: Hunter Green (RAL 6018)
- Dimensions: Cabinet 167mm height/diameter x 131mm deep (6.6 x 5.2-inch)
- Net Weight: 1.7 kg (3.8 lbs)

JBL Control GSF3 3-Inch Ground-Stake Landscape Speaker Supplied With

- 1x Ground Stake Bracket
- 1x L-Bracket