Vector DSP21300 Power Amplifier with DSP, 2x 1300W @ 4 Ohms

The Vector DSP21300 Power Amplifier with DSP is an advanced Class D amplifier bringing together efficiency, reliability and high power into one sleek, light weight 1U unit. With built-in digital signal processing you can control the route, gain, phase, EQ, delay, frequency, compression & limitation of your speaker system. Vector DSP models are perfectly suited for touring, live & corporate events or fixed installation into bars, pubs, clubs, schools, houses of worship etc. Models include 2 & 4 channel variants all with LCD display and four button control as well as a USB interface for PC setup.

Vector DSP21300 Power Amplifier with DSP Features

- All input channels can be routed to any output channel
- Adjustment range +15dB to -40dB (0.1dB Per Unit)
-- 0 - 20ms separate delay control for all input & output channels with speaker Delay upto 800ms
- Parametric equalizer & 31 band equalizer on all inputs & outputs
- Time: 10ms-3000ms, Hold Time:- 0ms-3000ms, Step: 1ms, Release Time: 10ms-3000ms, Step: 1ms

Vector DSP21300 Power Amplifier with DSP Specifications

- Circuit Category:- CLASS D
- THD: 0.035% @ 8 Ω, 1kHz 1/8 Rated Power
- IMD: 0.15% @ 8 Ω, 1kHz 1/8 Rated Power
- S/N Ratio (20Hz-20kHz, 4 Ω): >106db A
- Cross-talk (1kHz,4 Ω): >40dB
- Frequency Response: 10Hz to 20kHz ±1dB
- Input Impedance: Balanced 20K / Non Balanced 10K
- Dampening Factor (10-400Hz,8 Ohms): 600
- Slew Rate: 20V/us
- Input Sensitivity: 0.775V, 0 dB
- Protection Fuctions:
  - Limiter
  - Short Circuit
  - Overload
  - Overheat
  - Direct Current
  - Radio Interference
- Voltage Gain: 40.8/38.6/32
- Output Connectors: Speakon
- Input Connectors: XLR

Output Power:
- 2x 1500w @ 2 Ω
- 2x 1300w @ 4 Ω
- 2x 800w @ 8 Ω
- 1x 3300w @ 4 Ω Bridged Mode
- 1x 2600w @ 8 Ω Bridged Mode

Physical:
- Finish: Black
- Dimensions (W x H x D): 44 x 483 x 230 mm
- Rack Space: 1U
- Weight: 8kg