SigNET AC VL1/B2 Induction Loop Kit for Vehicles with AMT Microphone, Loop Cable and 24V to 12V Converter

The SigNET AC VL1/B2 Induction Loop Kit for Vehicles with AMT Microphone, Loop Cable and 24V to 12V Converter is a true current mode audio-frequency induction loop amplifier. Its compact design, 12V d.c. operation and availability in a variety of kit formats make it ideally suited for use in cars, taxis, buses and other private/commercial vehicles. VL1B2 ships with 24V to 12V power converter for use in vehicles with 24V output.
The SigNET VL1 has two 3.5mm jack inputs (microphone and line), both with their own level controls, and a metal compensation feature which can be used to offset the frequency problems associated with running an induction loop close to metal.
Measuring just 120mm wide, 31mm high and 60mm deep, the VL1 is ideal for dashboard mounting. It includes three indicators - Peak, Limit and Power On - and meets or exceeds the requirements of BS7594 and EN60118-4 when correctly installed.

SigNET AC VL1/B2 Induction Loop Kit for Vehicles with AMT Microphone, Loop Cable and 24V to 12V Converter Features

- Kit includes a compact mini-induction loop amplifier (pictured right) with keyholes for dashboard mounting, a cigarette lighter power adaptor, an AMT microphone, a pre-formed loop and an 'AFILS fittted' sticker
- Amplifier operates at 12V d.c. (24V vehicle kit VL1/B2 ships with power converter)
- Loop can be positioned in the vehicle's roof lining, under a seat, across the back of a seat or in a door panel to suit the application
- Metal compensation control helps combat the frequency response problems caused by metal 'absorbing' the magnetic field
- Optional VL9 lead available for connection to the vehicle's audio system

SigNET AC VL1/B2 Induction Loop Kit for Vehicles with AMT Microphone, Loop Cable and 24V to 12V Converter Specifications

- Type: Dash mounting; 12V
- Coverage: 1.2m² approx.
- Inputs:
  - 1x 3.5mm remote mic. socket
  - 1x line
- Indicators:
  - Input level
  - Loop current
  - Power on
- Controls:
  - Mic level
  - Line level
  - Loop drive
  - Metal compensation

Physical:
- Dimensions (W x H x D): 120 x 31 x 60mm
- Weight: 220g

SigNET AC VL1/B2 Induction Loop Kit for Vehicles with AMT Microphone, Loop Cable and 24V to 12V Converter Supplied With

- SigNET AC VL1 Induction Loop Amplifier
- SigNET AC AMT Microphone
- SigNET AC TX2 Pre-Formed Induction Loop Cable
- SigNET AC VL1/PSU24 24V to 12V Converter
- SigNET AC AL7 2.5mm DC power plug to bare end lead
- SigNET AC 'AFILS fittted' sticker