SigNET AC AKM3 Meeting/Lecture Room Hearing Loop Kit with SigNET PDA200E Amplifier and Ceiling Microphone

The SigNET AC AKM3 Meeting/Lecture Room Hearing Loop Kit with SigNET PDA200E Amplifier and Ceiling Microphone is a cost-effective induction loop amplifier that is designed to drive a perimeter loop of up to 200 square metres for assitive listening in meeting and conference rooms. The AKM3 kit comes with a hanging microphone for high quality audio input.

SigNET AC AKM3 Meeting/Lecture Room Hearing Loop Kit with SigNET PDA200E Amplifier and Ceiling Microphone Features

SigNET AC PDA200E Wall Mounted Induction Loop Amplifier
- A powerful and very cost-effective induction loop amplifier
- Up to 200 metres (metal free) coverage
- Metal compensation control
- Phantom power for electret microphones
- A variety of kits available
- Ideal for electrical contractors - no audio connectors or experience required

Ceiling Microphone
- Hi-SPL handling is ideal for suspension over choirs and orchestras
- Wide-range condenser element with low-mass diaphragm for superior performance
- Self-contained electronics eliminate need for external power modules
- Flat, smooth frequency response
- 7.6 m cable permanently attached between microphone and XLRM-type connector

SigNET AC AKM3 Meeting/Lecture Room Hearing Loop Kit with SigNET PDA200E Amplifier and Ceiling Microphone Specifications

SigNET AC PDA200E Wall Mounted Induction Loop Amplifier
- Induction Loop Type: Wall mounting, requires fixed mains wiring
- Coverage: Up to 200m² (Approx)
- Inputs:
  - 1x Microphone
  - 2x Line/Outreach
- Indicators:
  - Input level
  - Power
  - Compression
  - Peak Current (3,2,1)
- Controls:
  - Metal Compensation
  - Input level
  - Loop drive

Physical:
- Dimensions (W x H x D): 273 x 200 x 77mm
- Weight: 2.82kg

Ceiling Microphone
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Responce: 70-16,000 Hz
- Open Circuit Sensitivity: -37 dB (14.1 mV) re 1V at 1 Pa
- Impedance: 100 ohms
- Maximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range (typical): 106 dB, 1 kHz at Max SPL
- Signal-to-Noise Ratio: 66 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 9-52V DC, 2 mA typical
- Outpur Connector: 3-pin XLRM-type on cable
- Cable: 25' (7.6 m) long, permanently attached

Physical:
- Length: 56.9mm
- Diameter (Head): 12mm

SigNET AC AKM3 Meeting/Lecture Room Hearing Loop Kit with SigNET PDA200E Amplifier and Ceiling Microphone Supplied With

- 1x SigNET AC PDA200E induction loop amplifier
- Ceiling Microphone