SigNET AC AKM2 Lift/Elevator Induction Loop Kit
Ref: JP105726
The SigNET AC AKM2 Lift/Elevator Induction Loop Kit is a reliable and cost-effective hearing loop systems designed specifically for use in lift/elevator cars.
SigNET AC AKM2 Lift/Elevator Induction Loop Kit Supplied With- 1x SigNET AC PDA200E induction loop amplifier
- 2x Lengths of 2-core screened cable
SigNET AC AKM2 Lift/Elevator Induction Loop Kit Features
- Satisfies the requirements of the Disability Discrimination Act (DDA) and BS EN 871-70 (5.4.4.3 c)
- Fully compliant with the relevant parts of BS 7594 (when correctly installed) and BS EN 60118-4
- 2 line level inputs connect directly to the PDA200E induction loop amplifier; one input from the floor announcement system, one input from the emergency communication system
- Loop cable can be installed either on op, or in the suspended ceiling of a lift car
- Internal tamper-resistant drive, level and tone controls can be manually adjusted to suit system requirements
- Two balanced/unbalanced line-level inputs
- Input peak (Limit), output drive (1,2,3 Peak Current) and power on (Power) LEDs
- Fully automatic compressor-limiter which maintains the loop signal to improve intelligibility
- Robust metal enclosure for mounting on the lift car
- Easy to fit with straightforward internal screw connectors allowing installation by a competent electrician
- Complete with installation kit, instructions and 'loop fitted' sticker
SigNET AC PDA200E Wall Mounted Induction Loop Amplifier
- A powerful and very cost-effective induction loop amplifier
- Up to 200 metres (metal free) coverage
- Metal compensation control
- Phantom power for electret microphones
- A variety of kits available
- Ideal for electrical contractors - no audio connectors or experience required
SigNET AC AKM2 Lift/Elevator Induction Loop Kit Specifications
SigNET AC PDA200E Wall Mounted Induction Loop Amplifier
- Induction Loop Type: Wall mounting, requires fixed mains wiring
- Coverage: Up to 200m² (Approx)
- Inputs:
- 1x Microphone
- 2x Line/Outreach
- Indicators:
- Input level
- Power
- Compression
- Peak Current (3,2,1)
- Controls:
- Metal Compensation
- Input level
- Loop drive
Physical:
- Dimensions (W x H x D): 273 x 200 x 77mm
- Weight: 2.82kg
SigNET AC AKM2 Lift/Elevator Induction Loop Kit Supplied With
- 1x SigNET AC PDA200E induction loop amplifier
- 2x Lengths of 2-core screened cable
For Product Information & Pricing please Click Here Contact us for more images if needed