B&C 5MDN38 5-Inch Speaker Driver - 100W RMS, 16 Ohm

The B&C 5MDN38 5-Inch Speaker Driver boasts legendary B&C technology made with their famously critical quality control, allowing loudspeaker designs with appropriately scaled performance.

B&C 5MDN38 5-Inch Speaker Driver Features

- 200 W continuous program power capacity
- Waterproofed on front of cone
- 38 mm (1.5 inches) aluminium voice coil
- 240 - 10000 Hz response
- Shorting copper cap for extended HF response

B&C 5MDN38 5-Inch Speaker Driver Specifications

- Nominal diameter: 127 mm (5.0 inches)
- Nominal impedance: 16 Ω
- Nominal power handling: 100 W
- Continuous power handling: 200 W
- Frequency range: 240 - 10000 Hz
- Voice coil diameter: 38 mm (1.5 inches)
- Winding material: Aluminium
- Former material: Glass Fibre
- Winding depth: 10 mm (0.4 inches)
- Magnetic gap depth: 6 mm (0.24 inches)
- Flux density: 1.25 T
- Connection: Spade Terminals

Design:
- Surround shape: Triple Roll
- Cone shape: Exponential
- Magnet material: Neodymium Ring
- Spider: Single
- Pole design: Straight Pole
- Woofer cone treatment: WP Waterproof Front Side

Parameters:
- Fs: 240 Hz
- Re: 5.6 Ω
- Qes: 0.54
- Qms: 2.6
- Qts: 0.45
- Vas: 0.6 dm³ (0.02 ft³)
- Sd: 95.0 cm² (14.7 inches²)
- η₀: 1.7 %
- Xmax: 3.5 mm
- Xvar: 2.5 mm
- Mms: 9 g
- Bl: 11.5 Txm
- Le: 0.4 mH
- EBP: 444 Hz

Physical:
- Overall diameter: 150 mm (5.9 inches)
- Bolt circle diameter: 142 mm (5.6 inches)
- Baffle cutout diameter: 122.0 mm (4.8 inches)
- Depth: 75 mm (2.95 inches)
- Flange and gasket thickness: 9 mm (0.35 inches)
- Air volume occupied by driver: 0.35 dm³ (0.01 ft³)
- Net weight: 0.85 kg (1.9 lb)