JBL VRX918SP 18-Inch Active High Power Flyable Subwoofer, 750W - Black

The JBL VRX918SP 18-Inch Active High Power Flyable Subwoofer is a powered, suspendable subwoofer system containing a 2268FF neodymium magnet, patented Differential Drive, 18-inch woofer in a front-loaded, vented enclosure. The VRX918SP was designed specifically for use in arrays with the VRX932LAP Line Array speaker and VRX-AF Array Frame. In addition it may also be used in arrays consisting entirely of VRX918SP subwoofers.

JBL VRX918SP 18-Inch Active High Power Flyable Subwoofer Features

- Built-in JBL Drivepack DPC-2 amplifier module designed by Crown provides 1500 Watts of peak Power. DSP based resident input module provides system optimization, EQ and crossover functionality
- 18 inch, 2268FF dual voice coil, neodymium magnet Differential Drive woofer for high-power capacity and light weight
- Integral rigging hardware for simple connection of enclosures and optional array frame
- 20 mm threaded pole socket for solid, secure satellite speaker mounting
- Large port area for reduced distortion

JBL VRX918SP 18-Inch Active High Power Flyable Subwoofer Specifications

- Power Rating: 1500 Watts PeakLF: Dual-Bridged Technology, Class D
- Frequency Range: 31 Hz - 220 Hz
- Dimensions (H x W x D): 508 mm x 597 mm x 749 mm (20.0 in x 23.5 in x 29.5 in)
- Frequency Range (-10dB): 31 Hz - 220 Hz
- Maximum Peak Output: 126 dB SPL at 1m
- Bandpass Nominal Impedance: LF: 2 x 2 ohms
- LF Driver: 1 x JBL 2268FF 457 mm (18 in) dual voice coil Differential Drive woofer with neodymium-magnet
- Inputs: XLR with loop through
- User Controls: Input Attenuator (0-16 dB)Selectable 80 Hz or 120 Hz Low Pass 80 Hz High-Pass enable/disable for XLR loop thru.
- System Processing: DSP based, resident in Input Module
- System Management: DSP based limiters for mechanical and thermal protection
- AC Power Operating Range: 90-132 VAC or 216-264 VAC, 50/60Hz
- AC Line Voltage: User selectable: 120V/240V (-15%, +10%)
- AC Input Connector: Neutrik PowerCon (NAC 3MPA)
- AC Loop Through Connector: Neutrik PowerCon (NAC 3MPB)
- AC Current Requirements: 6A per system at 120V, 3A per system at 240V
- Enclosure: 18 mm birch plywood.
- Suspension / Mounting: Optional VRX-AF line-array frame kit or 10 mm forged eyebolts
- Finish: Black DuraFlex finish
- Grille: Powder coated, black, 16-gauge perforated steel with acoustically transparent foam
- Net Weight (each): 38.5 kg (85 lb)
- Optional Accessories: VRX-AF array frameSRX718S-CVR: Pull-over padded cover (works with WK-4S) SS4-BK adjustable satellite speaker pole WK-4S Caster kit
- Outputs: 1 x XLR
- Nominal Impedance: LF: 2 x 2 ohms