ADJ Encore Burst 200 Audience Blinder and Strobe

The Encore Burst 200 is an IPX4 rated, high intensity dual lens audience blinder/strobe. It's powered by two 110W warm white (2700K) CREE COB LEDs. The fixture is constructed with a rugged metal housing and an aluminum extrusion rails system to connect multiple fixtures to create a larger cluster of fixtures in a vertical or horizontal array.
The fixture features a Tungsten Mode effect that replicates a halogen-like dimming profile.

ADJ Encore Burst 200 Audience Blinder and Strobe Features

- Modular design to connect multiple fixtures together in a vertical or horizontal tray from a built-in rail system on the fixtures
- DMX Modes: 6
- RDM compatible (Remote Device management)
- Dimming Curve Modes: 6
- Dimming: 0 - 100% each module
- Pixel Control
- Strobe Effect
- Adjustable LED Refresh Rate (900-25,000Hz)
- Adjustable Gamma Brightness (2.0-2.8)
- With Wired Digital Communication Network

ADJ Encore Burst 200 Audience Blinder and Strobe Specifications

Connections:
- Data Input: 5pin DMX In/Out
- Power Input: IP65 Locking Power In/Out (with protective rubber caps)
- Safety Cable Loop

Electrical:
- 100-240V 50Hz/60Hz (Auto Sensing)
- Power Linking: 4 Fixtures @120V | 8 Fixtures @240V
- Max Power Consumption: 235W

IPX4 Rated:
- X (Protection against Dust) Fixture is not tested for dust ingress. 4 (Protection against Water) Fixture offers protection from a splash of water in any direction

Dimensions / Weight:
- Length: 400mm
- Width: 200.5mm
- Height: 215.5mm
- Weight: 6.8kg